Cartridge heat exchanger Carlyclean CARLYCLEAN-5000, 5 L canister

Carlyclean CARLYCLEAN-5000, 5 L canister heat exchanger

• CARLYCLEAN - CARLYCLEAN-MC: Suitable for all materials used in the production of heat exchangers (aluminum, copper ...) and protective coatings of the lamellae (paint, tin coating ...)

Economical: concentrated, CARLYCLEAN can be diluted. If the product is used in diluted form, no rinsing is required. • Environmentally friendly CARLYCLEAN - CARLYCLEAN-MC: Biodegradable (> 70%), Low FOV (Volatile Organic Compounds): 4,12%, non-hazardous to the environment.
• Environmentally friendly manufactured: controlled use of energy and water as well as recycling of waste ...

Applications:
• CARLYCLEAN is an alkaline fatliquoring concentrate for all surfaces, especially for the exterior cleaning of cooling and air conditioning systems (heat exchangers, fans, finned heat exchangers) for cleaning surfaces in contact with food.
• CARLYCLEAN combines the active ingredients of a cleansing emulsion. The high surface adhesion and dirt-releasing properties make it easy to loosen and remove the dirt.
• The regular use of CARLYCLEAN can improve the heat transfer capacity of the heat exchangers, increase the efficiency of the equipment, extend the life of the equipment and save energy and maintenance costs.
• CARLYCLEAN is designed for professional use and removes grease, slimy deposits, dust ...
• CARLYCLEAN-MC is a cleaner and dirt remover for microchannel exchangers.
• Ready-to-use product, pH neutral, preserves the natural aluminum oxide protective layer of heat exchangers, non-foaming.
• CARLYCLEAN-MC is designed for professional use and removes dust, pollen, grease and greasy deposits
• CARLYCLEAN-F is a cleaning foam for all surfaces (metal, plastic ...), in the form of an aerosol.
• CARLYCLEAN-F is intended for professional use and removes grease, slimy deposits, dust ...
• After cleaning the evaporator blades it is recommended to carry out an additional anti-microbial treatment by CARLYBIO. CARLYBIO is an effective disinfectant that kills bacteria (EN 1276), fungal infestation (EN 1650) and legionella (NFT 72.301). Further reports on the efficiency of CARLYBIO are available on request.

Approved for the cleaning of surfaces in contact with food, with indirect food contact.

Functional characteristics:
• CARLYCLEAN - CARLYCLEAN-MC: Suitable for all materials used in the manufacture of heat exchangers (aluminum, copper ...) and protective coatings of lamellas (paint, tin plating ...)
• Economical: concentrated, CARLYCLEAN can be diluted. If the product is used in dilute form, no rinsing is required.
• Environmentally friendly CARLYCLEAN - CARLYCLEAN-MC: Biodegradable (> 70%), low FOV (Volatile Organic Compounds): 4,12%, harmless to the environment.
• Environmentally friendly manufactured: controlled use of energy and water as well as recycling of waste ...
• CARLYCLEAN-F Foam cleaner, approved for non-certified food Contact (homologated InS Nr1795799)
• Suitable for all surfaces (Plastic, metal ...).
• Environmentally friendly: Biodegradable (> 95%, OCDE 301E), low FOV: 19.70%, harmless to the environment.
• Non-flammable propellant: R-1234ze (HFO).

Instructions for use:
CARLYCLEAN 500/5000/25000: Can be used in extremely different concentrations: neat or diluted (dilution up to 10%: 9 units of water on one unit CARLYCLEAN).
For heavily soiled surfaces (condensers): To ensure optimum efficiency it is recommended to spray the soiled areas with CARLYCLEAN and leave the product to work for at least 5 minutes. Then rinse with water. If necessary, repeat the procedure.
For medium to lightly contaminated surfaces (evaporator): CARLYCLEAN can be diluted with water in a ratio of 1: 5 to 1: 9. A subsequent rinsing is not required (for defrosting, only the fins must be rinsed off).
CARLYCLEAN-F: Shake the aerosol. Spray on the surfaces to be cleaned at a distance of 20 cm. Let absorb. Wipe and if necessary repeat

You will find further information in the data sheet above