Clamp meter for Job Link® System SC480 FIELDPIECE

Wireless communication directly with Job Link® system for electrical documentation

Low-pass filter for VFD systems Molex test leads for low-power circuits 3-phase test with two test leads Safety rating CAT IV – 600 V/CAT III – 1000 V Testing of HVAC electrical devices based on phase shift, true RMS value and inrush current function. Plus direct connection to the Job Link® system app for documenting electrical measurements. Electrical testing for HVACR true RMS readings through the clamp or test leads. Inrush current mode for recording the current consumption during start-up. Testing the phase shift with only two test leads The phase shift can be determined single-handedly using a test lead with crocodile clip (supplied) on L1. Voltage accuracy of frequency converters Low-pass filter to remove noise and obtain the true voltage value. Electrical capacitance Testing of questionable motor starting and running capacitors. Determine whether a capacitor needs to be replaced. Molex test leads Replace your normal test lead tips with the extra-thin Molex tips to take readings on hard-to-reach circuits. Magnetic hanger Hanging strap with which the measuring device can be fixed in position.

And more * Works with the Job Link app

* °C and °F

* HOLD/MAX/MIN

* High-voltage LED-

* and buzzer warning

* Non-contact voltage measurement

* LED and buzzer *

Pass-through LED and buzzer

* Diode test

* Simple temperature calibration

* Microampere direct current

* Frequency (Hz) through terminal

* Low resistance range for motor windings

* CAT III 1000 V * CAT IV 600 V

* Resolution of 0.01 A alternating current

* Display with backlight

* Automatic switch-off

Included in the scope of delivery: * SC480 * ATB1 thermocouple * ASA2 test leads with crocodile clips * ADLS2 silicone test leads * ANC12 – padded pouch * RCT2 Molex tips