Skip to main content Skip to search Skip to main navigation
Menu
Free planning tool from frigopartners

Cold room configurator: plan your cold room to size

Five short questions on cooling type, floor, inside dimensions, door and accessories — then you see the bill of materials for your cold room with prices from our shop and the space you need on site. Free and non-binding; on request our technicians check everything before delivery.

  • Bill of materials with live shop prices
  • Free expert check before delivery
  • No sign-up needed

Questions about sizing or selection?

Our technical support team will help you personally – by phone, call-back or in writing.

+49 2554 912 959 6 Mon–Thu 8 am–5 pm, Fri 8 am–3 pm (CET)

A service of H + H Kältetechnik GmbH, Laer, Germany – specialist wholesaler for refrigeration and air conditioning since 2008.

How to plan your cold room with the configurator

  1. Choose cooling type and floor: chilled (0…+8 °C) or frozen (−18…−25 °C), plus the matching floor — always insulated for freezer rooms.
  2. Enter the inside dimensions: length, width and height in millimetres — the configurator suggests the insulation thickness and works out panel lengths, outside dimensions and space needed.
  3. Door and accessories, then the price: cold room or freezer door, pressure relief valve, lighting, person-trapped alarm — at the end you see the bill of materials and estimated price and order directly or request a quote.

Within Germany you can order small cold rooms whose parts are no longer than 2.4 m directly via the cart, with a flat panel shipping charge of €500 excl. VAT. Longer panels and profiles need a special transport: for these rooms, freezer rooms, special sizes and delivery to other countries we put together a free quote for you, including freight. Find the right refrigeration equipment with the cooling load calculator — it takes over your room dimensions automatically. Complete packages are under cold room sets, individual components under condensing units and evaporators.

Frequently asked questions about planning a cold room

What insulation thickness does a cold room need?

PUR panels of 100 mm are standard today for chilled rooms (0…+8 °C); 60 mm is enough for small rooms and higher room temperatures. Freezer rooms (−18…−25 °C) need at least 100 mm, 120 mm is recommended. The configurator suggests 100 mm for chilled and 120 mm for freezer rooms; you can choose other thicknesses.

Can I build a cold room myself?

Yes — the PUR panels are butt-jointed and screwed together with inner and outer angles. We supply panels, door and profiles in standard lengths to match the insulation thickness; we do not cut to size. The refrigeration connection (condensing unit, evaporator, electrics) belongs in the hands of a qualified installer.

What does a made-to-measure cold room cost?

The estimated price depends on size, insulation and door — small rooms start in the low four-figure range. The configurator shows the current estimated price of your configuration as our shop displays it to you (incl. or excl. VAT depending on your account), excluding shipping. Within Germany we ship rooms whose parts are no longer than 2.4 m for a flat €500 excl. VAT; for longer parts and delivery to other countries we state the freight in the quote.

Are my dimensions checked before delivery?

If you request a quote, yes: our technicians check dimensions, insulation and door before delivery. If you order directly via the cart, please check the dimensions yourself — the panels are ordered specifically for you. The configuration is a non-binding estimate.

What cooling capacity does my cold room need?

That depends on size, temperature, insulation and use. Our cooling load calculator works out the required capacity in about 60 seconds and takes over your room dimensions directly from the configurator.

Shop Assistant AI

You are chatting with an AI assistant. Replies may contain errors and are non-binding.

Hello, I am your shop assistant, how may I help you?