-
Cold
- Compressor
- Condensing units
- Evaporator & Condenser
- Catering refrigeration technology
- Monoblocks & refrigeration sets
- Tool refrigeration
- Motors & Fans
- Solenoid and control valves
- Assembly material for refrigeration
- Chemistry Refrigeration
- Circuit parts
- Cold store
- Switchgear & Co
- Spare parts for household appliances
- Climate
- Ventilation
- Heat pumps
- Tools
- Promotional merchandise
- B2B Suite
- Enquiry form
- Manufacturer
Roller Evaporator
Which evaporator suits your cold room?
Choose by cooling capacity at your room temperature and ΔT, defrost and air throw; for a replacement, by the type number on the rating plate.
Choose by cooling capacity at your room temperature and ΔT, defrost and air throw; for a replacement, by the type number on the rating plate.
- Below about +2 °C room temperature, off-cycle defrost is usually not enough; then the evaporator needs electric or hot gas defrost.
- For low temperature, choose larger fin spacing (usually 6–7 mm) so that frost does not block the fins as quickly.
- The fan's air throw should roughly match the room depth so that the cold air reaches the whole room.
Filter products
More filters (2) Fewer filters
Do you have some questions about this products?
- Your personal contact person
- Ipek Gülen
- [email protected]
- +49 2554 912 983 9
-
🙋 Ipek Gülen
Not found what you are looking for?
You need Individual Solutions or larger Quantities?
Walter Roller
Roller ceiling-mounted air cooler DLKT 712 EC, 0014619, for A2L / A3 refrigerant LA=7 mm, air volume flow: 1600 m³/h, with defrost heater- Air flow
- 1600 m³/h
- Fin spacing
- 7 mm
Available
Walter Roller
Roller FKNT612ECD Flatline 0013330 Flat evaporator ceiling LA=6mm with heaterAvailable
Walter Roller
Roller S3GEC350S fan unit, 0610164 EC fan for DHN complete suction Ø 350mm 230V- Number of fans / fan blades
- 1 x 350 mm
Available
Walter Roller
Roller HVS401ECS EUROLINE S 0011656 Cube/block evaporator LA=4mm without heatingAvailable
Walter Roller
Roller DLK621EC Flatline 0013692 flat ceiling air cooler LA=6mm without heatingAvailable
Walter Roller
Roller air cooler FKNT 614, MultiRef A1, A2L, A3 - 0016290, LA=6 mm, air volume flow: 660 m³/h, fan:1x, with defrost heater- Air flow
- 660 m³/h
- Fin spacing
- 6 mm
Available
Walter Roller
Roller FKNT 626 MultiRef, slat spacing =6mm, with electric defrostingAvailable
Walter Roller
Roller FHVT612EC COI Flatline CO2 80bar block vaporiser LA=6mm with heaterAvailable
Walter Roller
Roller basic unit HKND700 KM 90540 Air conditioner soundproofed 230V ceilingAvailable
Walter Roller
Roller ceiling-mounted air cooler DLK 421 EC, 0013682, LA=4 mm, air volume flow: 890 m³/h, fan:2x- Air flow
- 890 m³/h
- Fin spacing
- 4 mm
Available
Walter Roller
Roller RDG 100 variant 7 140252 Room temperature controller for HKN(D)IL 800-1400Available
Walter Roller
Roller HVST703EC EUROLINE + 0011622 Cube/block evaporator LA=7mm with heaterAvailable
We determine the availability shown in this list from current stock and restocking times, regardless of the delivery country. We calculate the estimated delivery date for your delivery country on the product page and in the cart.
Can't find what you are looking for?
Send us a photo of the nameplate. We will check the successor type and availability.
Request a replacement →