-
Cold
- Compressor
- Condensing units
- Evaporator & Condenser
- Catering refrigeration technology
- Monoblocks & refrigeration sets
- Tool refrigeration
- Motors & Fans
- Solenoid and control valves
- Assembly material for refrigeration
- Chemistry Refrigeration
- Circuit parts
- Cold store
- Switchgear & Co
- Spare parts for household appliances
- Climate
- Ventilation
- Heat pumps
- Tools
- Promotional merchandise
- B2B Suite
- Enquiry form
- Manufacturer
Roller Evaporator
Which evaporator suits your cold room?
Choose by cooling capacity at your room temperature and ΔT, defrost and air throw; for a replacement, by the type number on the rating plate.
Choose by cooling capacity at your room temperature and ΔT, defrost and air throw; for a replacement, by the type number on the rating plate.
- Below about +2 °C room temperature, off-cycle defrost is usually not enough; then the evaporator needs electric or hot gas defrost.
- For low temperature, choose larger fin spacing (usually 6–7 mm) so that frost does not block the fins as quickly.
- The fan's air throw should roughly match the room depth so that the cold air reaches the whole room.
Filter products
More filters (2) Fewer filters
Do you have some questions about this products?
- Your personal contact person
- Ipek Gülen
- [email protected]
- +49 2554 912 983 9
-
🙋 Ipek Gülen
Not found what you are looking for?
You need Individual Solutions or larger Quantities?
Walter Roller
Roller evaporator UVT415EC 0011258 Flat evaporator ceiling LA=4mm with heaterAvailable
Walter Roller
Roller DLKT633EC COI Flatline CO2 80bar flat evaporator LA=6mm with heaterAvailable
Walter Roller
Roller DLKT631EC COI Flatline CO2 80bar flat evaporator LA=6mm with heaterAvailable
Walter Roller
Roller DLK412EC Flatline 0013684 Flat ceiling air cooler LA=4mm without heatingAvailable
Walter Roller
Roller DLKT632EC COI Flatline CO2 80bar flat evaporator LA=6mm with heaterAvailable
Walter Roller
Roller HVS 703 EC EP air cooler 0011619, LA=7 mm, air volume flow: 1670 m³/h- Air flow
- 1670 m³/h
- Fin spacing
- 7 mm
Available
Walter Roller
Roller FHVT604EC Flatline 0011242 Cube/block evaporator LA=6mm with heaterAvailable
Walter Roller
Roller FKNT628ECD Flatline 0013334 Flat evaporator ceiling LA=6mm with heatingAvailable
Walter Roller
Roller HVST705 EUROLINE + 0011063 Cube/block evaporator LA=7mm with heaterAvailable
Walter Roller
Roller DLKT631EC Flatline 0013723 flat ceiling air cooler LA=6mm with heaterAvailable
Walter Roller
Roller HVS701EC EUROLINE + 0011607 Cube/block evaporator LA=7mm without heatingAvailable
Walter Roller
Roller HVS 701 EC ES air cooler 46-0011657, LA=7 mm, air volume flow: 1350 m³/h, fan:1x- Air flow
- 1350 m³/h
- Fin spacing
- 7 mm
Available
Walter Roller
Roller FKN 414 Air cooler MultiRef A1, A2L, A3 - 0016272, LA=4 mm, air volume flow: 660 m³/h, fan:2x, without defrost heater- Air flow
- 660 m³/h
- Fin spacing
- 4 mm
Available
Walter Roller
Roller DLKT621EC COI Flatline CO2 80bar flat evaporator LA=6mm with heaterAvailable
Walter Roller
Roller VW 2 EC PLUS fan air cooler for refrigerated cabinets 0015855, LA=4.5 mm, air volume flow: 200 m³/h, without defrost heater- Air flow
- 200 m³/h
- Fin spacing
- 4.5 mm
Available
Walter Roller
Roller DLKT 7841 EC Next Roller ceiling-mounted air cooler 0015505, LA=7mm, fan: 1x- Fin spacing
- 7 mm
- Number of fans / fan blades
- 1x
Available
Walter Roller
Roller HVST 705 ES air cooler 0010423, LA=7 mm, air volume flow: 2760 m³/h- Air flow
- 2760 m³/h
- Fin spacing
- 7 mm
Available
We determine the availability shown in this list from current stock and restocking times, regardless of the delivery country. We calculate the estimated delivery date for your delivery country on the product page and in the cart.
Can't find what you are looking for?
Send us a photo of the nameplate. We will check the successor type and availability.
Request a replacement →