Filter dryer BI-Flow Carly DDCY 307 S/MMS with solder connection 7/8''

Filter drier BI-Flow Carly DDCY 307 S/MMS with solder connection 7/8''

Functional features:
- Maximum operating pressure: 46 bar
- Compatible with CHCs, CFCs, HFCs, CO2, as well as with their oils and associated additives
- Bidirectional filter drier with:
- High acid absorption -> Large capacity of moisture absorption and acid neutralisation at any temperature
- Very low pressure drop, thanks to a system of internal flaps patented by CARLY, which ensure an optimal distribution of flows in the circuit.
- No release of impurities inside the dryers during the reversal of the circuit.
- The initial drying capacity is guaranteed by heating the solid body to 200 °C and closing it with sealing caps.
- Hermetically sealed outer jacket made of painted steel, which ensures corrosion resistance.
- Filtering at the outlet prevents the dispersion of particles larger than 25 µ in the refrigerant circuit with very low load loss.
- No desorption, even at high temperatures.
- The dimensions of the filter driers are compatible with most products on the market.
- Installation is possible in all positions.
- The steel copper connections to be used up to a diameter of 3/4'' - 18 mm inch included facilitate soldering and allow the use of low silver content solder.

Application:
- For filtering and drying refrigerants and neutralising acids for liquid lines in refrigeration and air conditioning systems with reversible circuits, such as heat pumps.

For more information, see the data sheet above.