Intelligent axial fan iFAN air flow 106 m3/h, with intelligent humidity control

Intelligent axial fan iFAN air flow 106 m3/h, with intelligent humidity controlTechnical data: Speed: still/max Max. air flow 106 m3/h, with intelligent humidity controlTechnical data: Speed: still/max Max. air flow 106 m3/h, with intelligent humidity control. Transport capacity: 72 / 106 m³/h42,408  /  62,434 CFM20,016  /  29,468 l/s0,02002  /  0,02947 m³/s1202,4  /  1770,2 l/mSound pressure 3  0,02947 m³/s1202,4  /  1770,2 l/mSound pressure 3. Superstructure- The engine's special construction and the aerodynamically profiled impeller ensure low-noise running with a minimum noise level of 21 dBA, combined with a high air flow rate. - Three-dimensional design of the front panel and a wide range of colours for interchangeable decorative front panels make every interior design something special. The extremely flat housing of the fan is only 29 mm thick (no connecting piece included). - The fan is equipped with a slide switch for switching the power supply on and off during maintenance work. - Reliable ball bearing motor with minimal energy consumption 3. The motor is mounted on a rubber silencer, which provides vibration damping and quiet operation of the fan. - The motor is equipped with an integrated overheating protection. HUMIDITY MODE / Humidity control settings - The fan has an intelligent humidity sensor with three modes of operation: SLEEP mode: the fan does not run and is ready to receive a signal from the humidity sensor or external switch. SILENT operating mode: optimum dehumidification, a combination of sufficient exhaust air flow capacity of up to 83 m3 /h and quiet operation. MAX mode of operation: the humidity is reduced with the maximum capacity of the fan up to 133 m3/h. TIMER / time control / dehumidification / switch-on delay / switch off of the fan - The fan is equipped with three timers: - 1.5 seconds / 2.3 seconds / 1.5 seconds / 1.5 seconds / 1.5 seconds / 1.5 seconds / 1.5 seconds / 1.5 seconds / 2.5 seconds / 1.5 seconds / 1.5 seconds / 1.5 seconds /h. 5 seconds / 2 seconds. 5 seconds. 5 seconds / 1 seconds. 5 seconds / 2 seconds / 1 seconds. 5 seconds. 5 seconds. 5 seconds /s. 5 seconds / hour. 5 seconds / minute. 5 seconds. 5 seconds / hour. 5 seconds. 5 seconds / hour. 5 seconds. Adjustable for 30,45 and 60 min. Follow-up switch runs within 5,15 or 30 min. after pressing the motion sensor or the external switch and then returns to the previous operating mode. Switch-on delay switch is recommended for short-term bathroom use to avoid unnecessary activation of the fan. After receiving a signal from the motion or humidity sensor or after the external switch has been activated, the fan switches to a higher speed after the set time period (0,2 or 5 minutes) has elapsed. The fan switches to MAX (standard) or SILENT (customer setting) mode when humidity is increased. After receiving a signal from the motion sensor or from the external switch, the fan switches to SILENT mode. Automatic Interval Ventilation - Integrated function to switch on the automatic room ventilation. Every 15 hours the fan switches on for 2 hours to deflate a room with an air flow rate of 83/72 m3 /h (Ø125/100 mm).