€74.08*
Do you have some questions about this product?
- Your personal contact person
- Andrey Chudinov
- [email protected]
- +49 2554 912 983 9
- Nicht das gefunden wonach Sie suchen?
The RC models are control units that have been specially designed for static cooling units and are suitable for low or normal cooling. By simply modifying a parameter, it is possible to switch between direct and inverse operation so that heating units can also be controlled. The controllers have an analogue input for an NTC/PTC sensor and an output for cooling or heating control. An external switch and an alarm relay or buzzer are optionally available. In cooling mode, a defrosting process is carried out by switching off the compressor for a preset time. The appliance recognises temperature alarm conditions on the controller and saves the last three incidents (Haccp function). An external master device can read and overwrite the RC31 directories via the TTL port in order to monitor and change the mode of operation.
Voltage: 12-24Vac/dc
1 relay for compressor: 16A
1 relay for defrosting: 8A
1 relay for fan: 5A
1 configurable digital input
2 sensors: PTC/NTC
Installation opening 76x35 mm depth 69 mm
Installation opening 71x29 mm
The cold junction controller is supplied without thermostat.
2 thermostats can be ordered separately here:
PTC thermostat, l = 2 m, PVC, stainless steel cover 6x30 mm, S6-R, BETA. Temperature range from -20 to +150°C/ Accessory for cooling point controller
Accuracy: | ±0.5 °C |
---|---|
Dimensions: | 71 x 29 x 69 |
Display: | Display |
Manufacturer: | Beta |
Number of inputs: | 3 |
Output: | 3 |
Protection class: | IP65 |
Resolution: | 0.1 °C |
Sensor type: | 2xPTC/NTC |
Series: | RC33 |
Temperature range In °C: | -50 to +150 |
Voltage: | 12-24V |
alarm: | alarm |