Soft starter DANFOSS, MCI 50, 400 V, 50Hz, 50-3 I-O, 037N0088

Soft starter DANFOSS The DANFOSS soft starter, model MCI 15CH, is a high-quality product for refrigeration, air conditioning and ventilation technology as well as heat pumps. With a voltage of 380-415 V, a frequency of 50 Hz and a current of 15 A, this soft starter is ideal for use in demanding environments. Technical details: Model: MCI 15CH Voltage: 380-415 V Frequency: 50Hz Current intensity: 15A Phases: 3 Artikelnummer: 047-32037N0096 Advantages and benefits: The DANFOSS MCI 15CH soft starter offers numerous advantages, including: Gentle start-up behaviour for gentle commissioning of air conditioning and cooling systems Reliable protection against overload and short circuits for a long service life of the device Easy installation and operation for uncomplicated integration into existing systems

Soft starter DANFOSS, 230-480 V, 50 Hz, 15A,

Copeland ZH38K4E-TFD-524 Scroll Compressor for Heat Pumps R134A/R407CThe Copeland ZH38K4E-TFD-524 is a fixed-speed heating compressor designed for heat pump and reversible applications. It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating.Copeland ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A)The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kWZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiencyVariants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compressionThis extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilersAxial and radial flexibility of the scrolls ensures high reliabilityHigh efficiency and increased heating capacity, even at low source temperaturesHigh water temperatures for various heating systemsLow noise and vibration levelsTandem configurations possible for improved seasonal efficiencyExtended vapour injection (EVI) for maximum output and efficiencyMaximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g)Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g)Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g)Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g)Technical detailsDimensions (length × width × height) 24.7 × 24.1 × 43.8 cmApplication range HBPApplication range HTNumber of phases 3Design: HermeticCOP 3.54dB(A) @ 1 m 63dB(A) 74Pressure line (inches) 1/2"Electronics includedRecommended crankcase heater 70Frequency 50–60 HzWeight 38Airflow 14.4 m³/hCooling capacity (kW) 14.55Refrigerant R134ARefrigerant R407CCapacity under operating conditions: 7.2°C evap. temp., 54.4°C cond. temp., for R407C at 50 HzPower consumption [kW] 2.84Max. operating current (A) 10.1Max. operating pressure (low/high) [bar(g)] 22.6/32Motor code TFDOil pre-filledOil capacity (l) 1.90Oil type POEProduct family ZHSuction line (inches) 7/8"Compression type: ScrollSupply voltage 380–420 VSupply voltage 460VAdvantages and benefitsHigh efficiency and heating output, even at low source temperaturesLow noise and vibration levels for quiet operationOptimised performance through enhanced vapour injection (EVI)Tandem combinations enable improved seasonal efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Power supply 380-415V/3/50Hz - Cooling system 18-C-SCN453L8H This high-quality cooling system, model number 18-C-SCN453L8H, is the ideal solution for your cooling, air conditioning and ventilation requirements. It offers reliable performance and high efficiency to keep your rooms at the optimum temperature. With a horsepower of 6 CV and a displacement of 104 cm3, this cooling system is ideal for use in commercial and industrial environments. Technical details: Power according to Ashrae measuring conditions, refrigerant R404A: 8.15 kW Suction line connection: 7/8" Drain pipe connection: 5/8" Weight: 69.50 kg Operating current: 10.40 A Starting current (rotor blocked): 78 A Max. Operating current: 15 A Oil type: FV32S Oil refill: 2300 cc Sound level: 63 dB Temperature: Low Ambient temperature: 32.2 ºC Motor type: 3-PH induction motor (3IR) Speed: 2900 rpm Low pressure design: 1.65 M Pa High pressure design: 3.0 M Pa This cooling system is characterised by its high performance, reliability and efficiency. With its fixed speed technology, it provides constant cooling and ensures a pleasant room temperature. It is also suitable for both low and high pressure applications, guaranteeing flexibility and versatility.Advantages and benefits: Reliable cooling performance in industrial and commercial environments Energy-efficient design for low energy consumption