Rotalock soldering adapter valve, 1" - 12 mm for compressors.

Castel Rotalock screw-in valve. Rotalock connections: 1". SAE outlet: 5/8"

Copeland ZH09K1P-TFM-524 Scroll Compressor for Heat Pumps, R410AThe Copeland ZH09K1P-TFM-524 is a fixed-speed heating compressor designed for heat pump and reversible applications using R410A. It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating.Copeland ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A)The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kWZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas heating – resulting in correspondingly better seasonal efficiencyVariants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compressionThis extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilersAxial and radial flexibility of the scrolls ensures high reliabilityHigh efficiency and increased heating capacity, even at low source temperaturesHigh water temperatures for various heating systemsLow noise and vibration levelsTandem configurations possible for improved seasonal efficiencyExtended vapour injection (EVI) for maximum output and efficiencyMaximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g)Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g)Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g)Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g)Technical detailsDimensions (length × width × height) 24.2 × 24.2 × 42.2 cmApplication range HBPApplication range HTNumber of phases 3Design HermeticdB(A) @ 1 m 62Pressure line (inches) 1/2"Electronics includedRecommended crankcase heater 40Frequency 50 HzWeight 33Air flow rate 6.93 m³/hCooling capacity (kW) 10.3Refrigerant R410ACapacity under operating conditions: 7.2°C evap, temp; 54.4°C cond, temp; R410A at 50 HzMax. operating current (A) 7Motor code TFMPre-filled oilOil quantity (l) 1.24Oil type: POEProduct family ZHSuction line (inches) 7/8"Compression type: ScrollSupply voltage 380–420 VAdvantages and benefitsHigh efficiency and heating output, even at low source temperaturesLow noise and vibration levels for quiet operationTandem configurations enable improved seasonal efficiencyEnhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified technician.Electronics: The electronics are included in the scope of supply.

Soldering adapter for Rotalock valve 1.1/4" - 12 mm

Double nut connection 1/4" SAE.

Soldering adapter for Rotalock valve 1.3/4" - 42 mm

Soldering adapter kit for 47-32ZRA-48-72 The soldering adapter kit for 47-32ZRA-48-72 is an indispensable accessory for the installation of refrigeration, air conditioning and ventilation technology as well as heat pumps. With this kit, you can easily make solder connections and increase the efficiency of your system Technical details: 1 x soldering adapter diameter = 12.5 mm / 1" with Teflon seal 1 x soldering adapter diameter = 21.8 mm / 1.1/4" with Teflon seal Advantages and benefits: 1. easy installation: With the soldering adapters in various sizes, you can make solder connections quickly and easily 2. reliable sealing: thanks to the Teflon seals, the connections are secure and tight, which improves the efficiency of your system in the long term. 3. compatibility: The soldering adapters fit perfectly with your 47-32ZRA-48-72 device and are optimised to meet the requirements of refrigeration, air conditioning and ventilation technology as well as heat pumps.

Product description: Soldering adapter for Rotalock valve 1.3/4" - 35 mm Introduction: The AWA Rotalock soldering adapter is the ideal solution for your refrigeration system. With the type designation 528002050, this adapter offers maximum safety and flexibility.Technical details: Type: AWA Rotalock solder adapter straight L35 1-3/4UN to 35mm solder Type designation: 528002050 Type of connection: UN Connection dimension: 1 3/4 inch, 35 mm Advantages and benefits: 1. perfectly matched to standard refrigerants for universal use with R134a, R404A, R407C and R410A. 2. high strength and leak-tightness up to 45 bar pressure, tested on helium leak test systems. 3. suitable for alternative refrigerants such as CO2, NH3 and propane. With the AWA Rotalock soldering adapter, you get a reliable and flexible adapter that meets the highest safety standards and is also suitable for alternative refrigerants. Please contact us for customised adaptations.

Special discount on limited quantities only - normal price may apply for larger quantities. Universal Rotalock soldering valve. Rotalock connections: 3/4? Outlet: 10 mm ODS

Danfoss DCL 162 F filter dryer An optimal solution for your air conditioner or heat pump The Danfoss DCL 162 F filter dryer (article number: 47-32023Z5007) is specially optimised for use with HCFC and CFC refrigerants as well as mineral or alkybenzene. With a permissible operating pressure of up to 42 bar and a volume of 0.122 litres, this filter dryer offers reliable performance and a long service life. Technical details 80% molecular sieve and 20% aluminium oxide Flare connections: 1/4" SAE Sales-promoting contents The combination of first-class molecular sieve and aluminium oxide makes the Danfoss DCL 162 F filter dryer a reliable choice for your refrigeration, air conditioning and ventilation technology or heat pumps. With optimum filter performance and high pressure resistance, this filter dryer ensures efficient and long-lasting operation of your system.

Copper fittings for soldering elbow 90° a/i 16 mm - 47-32716-5001-016 These high-quality copper fittings are primarily manufactured in accordance with DIN EN 1254-1 and are ideal for use in cooling, air conditioning and ventilation technology as well as for heat pumps. With a 90 degree bend, internal and external threads and a diameter of 16 mm, they offer a wide range of options for various applications.Technical details: Diameter: 16 mm Bend: 90° a/i Thread: Internal and external Standard: DIN EN 1254-1 Sales-promoting content: The copper fittings 47-32716-5001-016 impress with their high-quality workmanship, which meets the requirements of the DIN standard. They are easy to work with and provide a reliable connection for your cooling, air conditioning and ventilation systems. Thanks to their 90° bend, they can be used flexibly in various installations.

Soldering adapter for Rotalock valve 1.1/4" - 18 mm