Soldering adapter for flanging and soldering Carly KRCY 2 MMS, 1/4" SAE - 6 mm ODF This soldering adapter has been specially developed to efficiently connect and secure refrigeration and air conditioning systems. With a maximum operating pressure of 46 bar, the Carly KRCY 2 MMS soldering adapter offers a number of advantages over conventional connections. It enables higher airtightness, faster installation speed and allows more frequent and cost-effective replacement of components without damaging or deforming the pipework, which often leads to refrigerant leaks. Technical features: Can be used with HFCs, CFCs, CHCs and CO² as well as all associated oils and additives For use with non-hazardous refrigerants of group 2 PED 2014/68/EU Classification in CE categories according to PED 2014/68/EU table Consisting of a brass tube for soldering, a brass nut and a copper gasket with centring aid Suitable for SAE flared connections in refrigeration and air conditioning systems Advantages and benefits: The Carly KRCY 2 MMS soldering adapter provides a reliable and tight connection for your pipe components. It enables simple and safe installation, ensures perfect tightness even after multiple component replacements and therefore considerably simplifies service work. With this soldering adapter, you can rely on a long-term and reliable connection that fulfils even the most demanding requirements.For more detailed information, please refer to the data sheet.

Soldering adapter for flaring x soldering Carly KRCY 3 MMS, 3/8" SAE - 10 mm ODFVoretile: - Maximum operating pressure 46 bar.- Compared to conventional connections (flaring of the copper pipe), the soldering adapters offer: A higher airtightness Faster installation speed Allow more frequent and cheaper replacement of components without damaging or deforming the pipework, which is often the cause of refrigerant leaks.Functional features:- The products can be used with HFCs, CFCs, CHCs and CO² as well as with all associated oils and additives. The products are designed for use with non-hazardous refrigerants of group 2 PED 2014/68/EU. For use of Carly components with hydrocarbon group 1 fluids - Propane R290, Butane R600, Isobutane R600a, Propylene R1270 with HFO's and transcritical CO² and for ORC application please contact Carly technical department.- The product classification in CE categories is according to the PED 2014/68/EU table, depending on the nominal diameter- The soldering adapters consist of a brass tube for soldering, a brass nut and a copper gasket with centring aid (except KRCY 6 S/MMS)- The brass tube is soldered to the tube at the soldering end and screwed to the component with the nut at the other end; the guided copper gasket is inserted into the specially designed recess on the flared side.- Each size is supplied in plastic bags of 10 complete sets. To prevent any damage, the 10 copper seals are packed separately in a cardboard box.Application: - The soldering adapters can be used for all pipe components with SAE flared connections in refrigeration and air conditioning systems. - They guarantee perfect tightness even after repeated replacement of the components and thus simplify service work.For more information, see the data sheet above