Soldering adapter for copper pipes for flaring x soldering Carly KRCY 6 S, 3/4" BSP SAE - 3/4" ODF, 1 pc

Soldering adapter for flaring x soldering Carly KRCY 6 S 3/4" BSP SAE - 3/4" ODF

Voretile:
- Maximum operating pressure 46 bar.
- Compared to conventional connections (flaring of the copper pipe), the soldering adapters offer:
a higher airtightness
faster installation speed
allow more frequent and cheaper replacement of components without damaging or deforming the pipework, which are often the cause of refrigerant leaks.

Functional features:
- The products can be used with HFCs, CFCs, CHCs and CO² as well as with all associated oils and additives. The products are designed for use with non-hazardous refrigerants of group 2 PED 2014/68/EU. For use of Carly components with hydrocarbon group 1 fluids - Propane R290, Butane R600, Isobutane R600a, Propylene R1270 with HFO's and transcritical CO² and for ORC application please contact Carly technical department.
- The product classification in CE categories is according to the PED 2014/68/EU table, depending on the nominal diameter
- The soldering adapters consist of a brass tube for soldering, a brass nut and a copper gasket with centring aid (except KRCY 6 S/MMS)
- The brass tube is soldered to the tube at the soldering end and screwed to the component with the nut at the other end; the guided copper gasket is inserted into the specially designed recess on the flared side.
- Each size is supplied in plastic bags of 10 complete sets. To prevent any damage, the 10 copper seals are packed separately in a cardboard box.

Application:
- The soldering adapters can be used for all pipe components with SAE flared connections in refrigeration and air conditioning systems.
- They guarantee perfect tightness even after repeated replacement of the components and thus simplify service work.

For more information, see the data sheet above