Stainless steel vibration damper with nickel-plated steel connections Carly EVCYAC 6 MMS solder connection 18 mm

Stainless steel vibration dampers with nickel-plated steel connections Carly EVCYAC 6 MMS solder connection 18 mm

Functional features:
- The products are compatible with CHCs, CFCs, HFCs, CO2 , as well as with their oils and associated additives. They are designed for use with non-hazardous refrigerants of group 2 of PED 2014/68/EU. For the use of CARLY components with group 1 fluids of the hydrocarbon type - propane R290, butane R600, isobutane R600a, propylene R1270 - with HFCs and transcritical CO2 and for an application of organic cycle of RANKINE, please contact the CARLY technical service.
- The classification of the products according to their nominal size in EC categories is shown in the table of PED 2014/68/EU.
- They consist of a flexible stainless steel hose with a steep corrugated profile, welded on both sides and covered with a stainless steel wire mesh (see drawing 2).
- Nickel-plated steel connections on the standard models.
- The vibration dampers are cleaned, dried and individually shrink-wrapped in plastic film.

Application:
- Reduction of mechanical vibrations caused by the compressor on the pressure, liquid, suction line and oil return. Indirect effect on noise generation and elimination of thermal stresses in the refrigeration and air conditioning installation.
- The vibration dampers have no effect on the noise generated by gas pulsations in the pressure line. This is the task of the SCY silencer.

For more information, see the data sheet above