CPS VPB6D Black Max vacuum pump – spark-proof for A1, A2L, A3 and NH3 Product description The CPS VPB6D Black Max vacuum pump is a two-stage, spark-proof vacuum pump for professional use in refrigeration and air-conditioning technology. It is suitable for work on refrigerant systems using A1, A2, A2L and A3 refrigerants as well as NH3 / R717, in accordance with the manufacturer’s specifications. With a free suction volume of 151 l/min at 50 Hz , a final vacuum of up to 0.033 mbar and a powerful 1/2 PS motor, the VPB6D is designed for fast and reliable evacuation. Thanks to its two-stage design, the pump achieves a high vacuum, making it ideal for the commissioning, maintenance and repair of refrigeration, air-conditioning and heat pump systems. Your benefits Spark-proof design for modern refrigerant applications Suitable for A1, A2, A2L, A3 and NH3/R717 in accordance with the manufacturer’s specifications Two-stage vacuum pump for a high ultimate vacuum 151 l/min free intake volume at 50 Hz Final vacuum down to 0.033 mbar Integrated solenoid valve to prevent backflow in the event of a power failure Gas ballast valve for improved performance in more humid systems Dual-voltage motor for 115 V and 230 V Double-sealed sight glass made of real glass Easily accessible oil drain for simple maintenance Robust Black-Max design for daily service use For service, maintenance and commissioning The CPS VPB6D has been developed for specialist refrigeration contractors who regularly evacuate refrigeration, air-conditioning and heat pump systems. Thanks to its high suction capacity and two-stage design, the pump is suitable for both new installations and service work, repairs and the replacement of components. A suitable pump is crucial, particularly when working with modern refrigerants such as R32, R1234yf, R454C, R290 or R600a . The spark-proof design facilitates the professional and safe handling of the relevant refrigerant classes. Integrated solenoid valve The integrated solenoid valve prevents air from flowing back into the evacuated system in the event of a power cut or when the pump is switched off . This helps to maintain the vacuum achieved more effectively and reduces the risk of the system becoming contaminated again. Gas ballast valve for improved evacuation The gas ballast valve aids start-up and evacuation, particularly when moisture is present in the system or when operating at lower ambient temperatures . This allows the pump to operate more efficiently and achieve a deep vacuum more reliably. Typical applications Evacuation of refrigeration systems Servicing of air-conditioning systems Maintenance and commissioning of heat pumps Work with A2L refrigerants such as R32 and R1234yf Work with A3 refrigerants such as R290 and R600a NH3/ammonia systems in accordance with manufacturer’s approval Customer service, workshop and installation call-outs Note on use When using flammable refrigerants and NH3, the applicable safety regulations, manufacturer’s specifications and legal requirements must be observed. The pump should only be used by qualified specialist personnel. Before use, check that the refrigerant, system, oil, connections and working environment are suitable for the application. Why choose the CPS VPB6D Black Max? The CPS VPB6D is the ideal choice when a robust, high-performance and spark-proof vacuum pump is required for modern refrigerants. The combination of two-stage pumping technology, high suction capacity, a solenoid valve, gas ballast and low weight makes it particularly well-suited for professional refrigeration and air-conditioning servicing. The CPS VPB6D Black Max vacuum pump is a two-stage, spark-proof vacuum pump for A1, A2, A2L, A3 and NH₃ refrigerants. With a flow rate of 151 l/min, a final vacuum of 0.033 mbar, a 1/2 PS motor, a solenoid valve, a gas ballast valve and a weight of 11 kg, it is ideally suited for evacuation, servicing and commissioning in refrigeration and air-conditioning systems. Technical data Manufacturer CPS Products Type VPB6D Series Black Max Equipment type Intrinsically safe vacuum pump Model Two-stage Suitable refrigerant classes A1, A2, A2L, A3, NH3/R717 Flow rate 151 l/min at 50 Hz Ultimate vacuum 0.033 mbar / 25 microns Motor power 1/2 PS / 368 W Motor speed 2,880 / 3,440 rpm Supply voltage 115 V / 230 V, 50/60 Hz Connection size 1/4", 5/16", 3/8" SAE Cable length 3 m Operating temperature 0 °C to 52 °C Oil capacity 0.54 l Oil capacity approx. 470–540 ml, depending on the data source Dimensions approx. 350 x 140 x 260 mm Weight 11 kg Features Two-stage pump technology Spark-proof, sealed electronics Integrated solenoid valve Gas ballast valve Easily accessible oil drain Double-sealed sight glass made of real glass Permanently attached 3-metre mains cable Robust Black-Max construction Suitable for A1 refrigerants A2 refrigerants A2L refrigerants such as R32, R1234yf and R454C A3 refrigerants such as R290 and R600a NH3 / R717 Servicing of refrigeration and air-conditioning systems Heat pump servicing Scope of delivery CPS VPB6D Black Max vacuum pump Permanently fitted mains cable Oil for initial filling Note on oil and maintenance Vacuum pump oil should be clean and free from moisture, acids and contaminants. To ensure a long service life and reliable vacuum performance, the oil should be checked regularly and changed as required.

German description follows - please contact us if you have any questions about the product.

Filter dryer FDB Hermetic Design, bead style, for liquid refrigerants - Compressed bead style (suspended) - Optimum blend of molecular sieve and activated alumina combined with high filtration performance - Final filtration of 20 micron filtration initially for more efficient use of surface area of desiccant - High water and acid capacity - Padded flow for non-turbulent performance - ODF copper connections for easy soldering - High water and acid capacity - Padded flow for non-turbulent performance - ODF copper connections for easy soldering. Operating pressure PS: 45 bar - CE marking by type 3.3 PED 97/23 EC - HP Marking acc. to pressure equipment directive

49-14023003: Internal Core This internal core is an essential part for cooling, air conditioning and ventilation systems, as well as for heat pumps. It ensures that your system runs smoothly and efficiently. Ideal for professional installations and repairs. Technical features: Material: high-quality steel Diameter: 30 mm Length: 150 mm Weight: 500 g Compatible with all common models Sales-promoting content: The high-quality workmanship and perfect fit guarantee smooth operation and maximum efficiency in your cooling, air conditioning and ventilation system. With our Internal Core, you can count on reliable performance and save costs by reducing energy consumption.Another major advantage is the ease of installation and maintenance, which saves time and money. Rely on the quality of this product to keep your system in top condition and extend its service life.

Adapter straight R410a - 1/2" - 20 UNF x 1/4" SAE with valve (QC-S410) 5/16" SAE x 1/4" SAE This adapter is ideal for use in refrigeration, air conditioning and ventilation systems as well as in heat pumps. With its connection size of 1/4" male thread x 5/16" female thread, it is versatile and offers a reliable connection for various applications.Technical details: Connection size: 1/4" male thread x 5/16" female thread Adapter type: straight Thread: 1/2" - 20 UNF x 1/4" SAE With valve (QC-S410) for easy operation Compatible with 5/16" SAE x 1/4" SAE connections Sales-promoting content: This adapter is characterised by the following features: Easy handling thanks to the integrated valve (QC-S410) Rugged construction for long-lasting performance

NBR rubber seal kit for 1/4SAE, 1/2-16ACME filling hoses WIGAM G19020 The NBR rubber seal kit for 1/4SAE, 1/2-16ACME filling hoses WIGAM G19020 is an essential accessory for refrigeration, air conditioning and ventilation technology as well as heat pumps. With this kit, you can easily and reliably replace seals to optimise the performance and efficiency of your appliances. Technical details: Kit of 10 gaskets Fits all HD, GY, W and CSA filling hoses Minimum order quantity: 1 bag with 10 seals Advantages and benefits: 1. universal application: The kit fits a wide range of filling hoses, ensuring flexibility and compatibility. 2. easy handling: with just one bag you get all the seals you need for replacement, saving time and effort. 3. high-quality materials: The seals are made of NBR rubber, which is known for its durability and resistance to various liquids.

testo 550-2 Set digital installation aid for cooling systems and heat pumps Introduction: The testo 550s set is the ideal digital installation aid for the service and maintenance of refrigeration systems and heat pumps. The set includes 2 clamp meters, a transport case, calibration protocol and batteries. Technical details: Type: Digital 2-way installation aid set Type of connection: UNF Number of ways: 2 Sensor type: 2 x plug-in (NTC) Bluetooth: Yes Dimensions: 121mm x 60mm x 210mm, Weight: 0.826kg A3-compliant: Suitable for use with flammable Group A3 refrigerants in accordance with safety regulations Advantages and benefits: The testo 550s Set enables quick and easy reading of the values on the display thanks to large numbers. With two temperature-compensated pressure sensors, high and low pressure can be measured precisely and the temperatures calculated automatically. The digital installation aid is ideal for all measurement tasks on cooling systems and heat pumps, and simultaneous calculation of superheating and subcooling is possible in real time. The robust housing with protection class IP54 and the large graphic display make the testo 550s Set a reliable aid for the commissioning, service and maintenance of refrigeration and air conditioning systems and heat pumps.

REFCO filling hose 9883281, yellow, 60 bar, CL-200-Y, 7/16"-20 UNF valve core pusher, 500 cm High-quality filling hose for all common refrigerants with 1/4" SAE fittings. The special rubber compound is extremely durable thanks to its high pressure resistance and low embrittlement. Twisted PTFE seals are secured in the union nuts with a snap system and protected against blow-outs. Features Replaceable PTFE seal with blow-out protection High-quality hose compound: maximum service life, resistant to hardening/brittleness Fluted union nuts for secure manual tightening 14 mm hexagon for 1/4" SAE (16 mm for 1/2"-20 UNF) Integrated 7/16"-20 UNF valve core pusher Specifications Inlet: 1/4" SAE, 45° bent Outlet: 1/4" SAE Colour: yellow Length: 5000 mm (5 m) Hose diameter: 6.35 mm (1/4") Working pressure: 60 bar (according to type CL-200-Y) Maximum/burst pressure: 300 bar Materials: brass, rubber Note: Some documents may state "max. operating pressure 300 bar"; the industry standard is 60 bar working pressure and 300 bar burst pressure. Please check project-specific requirements.

Standard filling hose 45-41603 The standard filling hose 45-41603 is ideal for use in refrigeration, air conditioning and ventilation technology as well as for heat pumps. It was specially developed for professionals to enable efficient and reliable work Technical details: Working pressure: 52 BAR Burst pressure: 210 BAR Hose length: 150cm Produced by Goodyear Advantages and benefits: The standard filling hose 45-41603 impresses with: High pressure resistance: With a burst pressure of 210 BAR, the hose is particularly robust and durable Reliable performance: The working pressure of 52 BAR ensures precise and efficient filling of refrigeration and air conditioning systems.Goodyear quality: The hoses are produced by Goodyear, which speaks for the highest standards in terms of material quality and workmanship.

Straight Connector – 1/4-3/8 Set (5 pcs) Big Foot Systems.

Refrigerant extraction station HC-3 (formerly CARESAVER Universal) The HC-3 refrigerant extraction station is the ideal solution for extracting refrigerants from cooling and air conditioning systems. This compact and mobile extraction station, formerly known as the CARESAVER Universal, impresses with its versatility and user-friendly design. It is specially designed for use with propane (R290) and covers a wide range of refrigerants. With the HC-3, liquid and gaseous refrigerants can be extracted directly from the system into a suitable container. Technical features Refrigerants: R22, R134a, R404A, R407C, R410A, R413A, R417A, R502, R600a (isobutane), R290 (propane), R32, R441A, R1234yf, R1270 and CARE® refrigerants Application areas: Small and commercial refrigeration systems, air conditioning systems, automotive Voltage supply: 230 V / 1 Ph / 50 Hz (optionally also 110 V / 1 Ph / 50 Hz) Compressor: Fully hermetic and oil-lubricated, air-cooled Power consumption: 145 W Working current: 1.3 A at 230 V AC Environmental temperature during operation: 0 °C to +35 °C Extraction capacity: 32 kg/h Maximum pressure: 13 bar (inlet), 25 bar (outlet) Protective functions: High pressure switch, thermal overload protection Connections: ¼" SAE male thread Size (L x W x H): 417 x 232 x 335 mm Weight: 17 kg Special features Broad refrigerant compatibility: Supports a wide range of refrigerants, including environmentally friendly alternatives such as R290 (propane) and R600a (isobutane). Easy to use: User-friendly design for quick and easy extraction of refrigerants. Flexible use: Ideal for various applications, from small to commercial refrigeration systems and the automotive industry. High pressure and overload protection: Built-in safety features ensure safe and reliable use. Compact and lightweight design: Easy to transport and versatile with a weight of just 17 kg and compact dimensions. Application areas The HC-3 refrigerant extraction station is particularly suitable for: Maintenance of refrigeration and air conditioning systems Extraction of refrigerants from refrigerators, refrigerated counters and air conditioning systems Automotive air conditioning service Commercial and industrial refrigeration and air conditioning systems Discover a flexible, mobile and safe solution for extracting refrigerants in various applications with the HC-3.

testo 557s - Smart digital installation aid with 4-way valve block The testo 557s is the ideal tool for professionals in refrigeration, air conditioning and ventilation technology as well as in the field of heat pumps. With its smart technology and versatile functions, it supports the efficient monitoring and control of refrigeration and air conditioning systems. Technical details: Display: New dot matrix display with simple 4-button operation Connectivity: Bluetooth 5.0 for wireless data transmission Protection class: Dust and splash-proof according to IP class 54 Compatibility: With testo Smart Probes and testo Smart App Temperature range: -20 ... +50 °C (operating temperature), -20 ... +60°C (storage temperature) Dimensions: 210 x 121 x 60 mm Pressure sensor: Measuring range: -1 ... 60 bar Accuracy: ±0.5 % fs (±1 digit) Resolution: 0.01 bar / 0.1 psi Temperature sensor: Measuring range: -50 ... +150 °C Accuracy: +/- 0.5 °C Resolution: 0.1 °C A3-compliant: Suitable for use with flammable Group A3 refrigerants in accordance with safety regulations Advantages and benefits: The testo 557s offers precise measurements and user-friendly operation. Thanks to Bluetooth connectivity, data can be transferred quickly and easily. Compatibility with testo Smart Probes and the Smart App enables efficient data evaluation and analysis. With its robust housing and IP class 54, the testo 557s is ideally suited for use in demanding environments. Selling points include easy handling, the high accuracy of the measurement values and the versatile application possibilities in various industries. The testo 557s is an indispensable tool for professionals who rely on reliable and precise measurements.

German description follows - please contact us if you have any questions about the product.

Ball valve for hose, universal 1/4" brand Univerzální

Refco ball shut-off valve red with lever handle 1/4" x 1/4" SAE-R 60bar The Refco ball shut-off valve in red is a high-quality valve that has been specially developed for use in refrigeration and air conditioning systems. With a working pressure of 60 bar and a robust construction made of aluminium, brass and plastic, this valve offers reliable performance and a long service life. Technical details: - Colour: blank, red - Connection type: SAE - Connection dimension: 1/4 in - Connection A: Male thread, SAE 1/4 in - Connection B: Female thread, SAE 1/4 in Pressure specifications: - Working pressure: 60 bar Logistics information: - Manufacturer article number: 8481.8090 - Gross weight: 0.1 kg - EAN code: 7640126682099 - Country of origin: CHE (Switzerland) Material: - Material: aluminium, brass, plastic Valves: - Schrader handle: Yes