Filter dryer X2899-1018 1/4" for CARESAVER-Universal/HC-3

RDA HC-AIR - Blower with ATEX motor for safe room ventilation The RDA HC-AIR is a powerful blower with an ATEX-certified motor that has been specially developed for safe room ventilation when recovering flammable refrigerant gases such as R290 and R600a. Its robust design and high efficiency make it an indispensable accessory for handling hydrocarbon refrigerants.Features ATEX-certified motor - Electronically switched for maximum efficiency Spark-free, thermoplastic fan - High performance with low noise level Integrated storage compartment - Space-saving cable storage 5 m power cable - With moulded plug for easy handling Rugged steel construction - Durability and resilience Optimal for working with hydrocarbon coolants Recommended applications The HC-AIR blower is ideal for use in workshops and service areas where flammable refrigerants are used. It ensures that vapours caused by leaks or spills are efficiently removed. Guidelines for safe use: Switch on the fan before starting work with refrigerants. Place the module at floor level in the work area (max. 5 metres away). Ventilate the work area well to ensure rapid dissipation of vapours. No ignition sources within a 3 metre radius of the system. Use of a hydrocarbon detector to monitor the environment. Recommended procedure for HC systems Connect the RDA HC-Air module 3 metres away from the work area and place it at ground level. Connect the RDA HC-3 module at a distance of 3 m for safe recovery of hydrocarbon refrigerants. If the low pressure indicator light comes on, switch the unit to low pressure and let it run for 1 minute. Pressurise the system with nitrogen (slightly above atmospheric pressure).Check with a HC sensor that there is no hydrocarbon refrigerant in the air before using a blowtorch. Carry out the necessary maintenance work and complete the service procedure. Technical data Air flow rate: 700 m³/h Voltage: 230V-50Hz Power consumption: 25W Max. Ambient temperature: -20°C to +55°C Dimensions (L x W x H): 300 x 220 x 380 mm Weight: 6.48 kg The RDA HC-AIR blower is the ideal solution for safe ventilation in potentially explosive atmospheres and ensures maximum protection when handling flammable refrigerants.

Refco ball shut-off valve red with lever handle 1/4" x 1/4" SAE-R 60bar The Refco ball shut-off valve in red is a high-quality valve that has been specially developed for use in refrigeration and air conditioning systems. With a working pressure of 60 bar and a robust construction made of aluminium, brass and plastic, this valve offers reliable performance and a long service life. Technical details: - Colour: blank, red - Connection type: SAE - Connection dimension: 1/4 in - Connection A: Male thread, SAE 1/4 in - Connection B: Female thread, SAE 1/4 in Pressure specifications: - Working pressure: 60 bar Logistics information: - Manufacturer article number: 8481.8090 - Gross weight: 0.1 kg - EAN code: 7640126682099 - Country of origin: CHE (Switzerland) Material: - Material: aluminium, brass, plastic Valves: - Schrader handle: Yes

Refrigerant extraction station HC-3 (formerly CARESAVER Universal) The HC-3 refrigerant extraction station is the ideal solution for extracting refrigerants from cooling and air conditioning systems. This compact and mobile extraction station, formerly known as the CARESAVER Universal, impresses with its versatility and user-friendly design. It is specially designed for use with propane (R290) and covers a wide range of refrigerants. With the HC-3, liquid and gaseous refrigerants can be extracted directly from the system into a suitable container. Technical features Refrigerants: R22, R134a, R404A, R407C, R410A, R413A, R417A, R502, R600a (isobutane), R290 (propane), R32, R441A, R1234yf, R1270 and CARE® refrigerants Application areas: Small and commercial refrigeration systems, air conditioning systems, automotive Voltage supply: 230 V / 1 Ph / 50 Hz (optionally also 110 V / 1 Ph / 50 Hz) Compressor: Fully hermetic and oil-lubricated, air-cooled Power consumption: 145 W Working current: 1.3 A at 230 V AC Environmental temperature during operation: 0 °C to +35 °C Extraction capacity: 32 kg/h Maximum pressure: 13 bar (inlet), 25 bar (outlet) Protective functions: High pressure switch, thermal overload protection Connections: ¼" SAE male thread Size (L x W x H): 417 x 232 x 335 mm Weight: 17 kg Special features Broad refrigerant compatibility: Supports a wide range of refrigerants, including environmentally friendly alternatives such as R290 (propane) and R600a (isobutane). Easy to use: User-friendly design for quick and easy extraction of refrigerants. Flexible use: Ideal for various applications, from small to commercial refrigeration systems and the automotive industry. High pressure and overload protection: Built-in safety features ensure safe and reliable use. Compact and lightweight design: Easy to transport and versatile with a weight of just 17 kg and compact dimensions. Application areas The HC-3 refrigerant extraction station is particularly suitable for: Maintenance of refrigeration and air conditioning systems Extraction of refrigerants from refrigerators, refrigerated counters and air conditioning systems Automotive air conditioning service Commercial and industrial refrigeration and air conditioning systems Discover a flexible, mobile and safe solution for extracting refrigerants in various applications with the HC-3.

CPS VPB6D Black Max vacuum pump – spark-proof for A1, A2L, A3 and NH3 Product description The CPS VPB6D Black Max vacuum pump is a two-stage, spark-proof vacuum pump for professional use in refrigeration and air-conditioning technology. It is suitable for work on refrigerant systems using A1, A2, A2L and A3 refrigerants as well as NH3 / R717, in accordance with the manufacturer’s specifications. With a free suction volume of 151 l/min at 50 Hz , a final vacuum of up to 0.033 mbar and a powerful 1/2 PS motor, the VPB6D is designed for fast and reliable evacuation. Thanks to its two-stage design, the pump achieves a high vacuum, making it ideal for the commissioning, maintenance and repair of refrigeration, air-conditioning and heat pump systems. Your benefits Spark-proof design for modern refrigerant applications Suitable for A1, A2, A2L, A3 and NH3/R717 in accordance with the manufacturer’s specifications Two-stage vacuum pump for a high ultimate vacuum 151 l/min free intake volume at 50 Hz Final vacuum down to 0.033 mbar Integrated solenoid valve to prevent backflow in the event of a power failure Gas ballast valve for improved performance in more humid systems Dual-voltage motor for 115 V and 230 V Double-sealed sight glass made of real glass Easily accessible oil drain for simple maintenance Robust Black-Max design for daily service use For service, maintenance and commissioning The CPS VPB6D has been developed for specialist refrigeration contractors who regularly evacuate refrigeration, air-conditioning and heat pump systems. Thanks to its high suction capacity and two-stage design, the pump is suitable for both new installations and service work, repairs and the replacement of components. A suitable pump is crucial, particularly when working with modern refrigerants such as R32, R1234yf, R454C, R290 or R600a . The spark-proof design facilitates the professional and safe handling of the relevant refrigerant classes. Integrated solenoid valve The integrated solenoid valve prevents air from flowing back into the evacuated system in the event of a power cut or when the pump is switched off . This helps to maintain the vacuum achieved more effectively and reduces the risk of the system becoming contaminated again. Gas ballast valve for improved evacuation The gas ballast valve aids start-up and evacuation, particularly when moisture is present in the system or when operating at lower ambient temperatures . This allows the pump to operate more efficiently and achieve a deep vacuum more reliably. Typical applications Evacuation of refrigeration systems Servicing of air-conditioning systems Maintenance and commissioning of heat pumps Work with A2L refrigerants such as R32 and R1234yf Work with A3 refrigerants such as R290 and R600a NH3/ammonia systems in accordance with manufacturer’s approval Customer service, workshop and installation call-outs Note on use When using flammable refrigerants and NH3, the applicable safety regulations, manufacturer’s specifications and legal requirements must be observed. The pump should only be used by qualified specialist personnel. Before use, check that the refrigerant, system, oil, connections and working environment are suitable for the application. Why choose the CPS VPB6D Black Max? The CPS VPB6D is the ideal choice when a robust, high-performance and spark-proof vacuum pump is required for modern refrigerants. The combination of two-stage pumping technology, high suction capacity, a solenoid valve, gas ballast and low weight makes it particularly well-suited for professional refrigeration and air-conditioning servicing. The CPS VPB6D Black Max vacuum pump is a two-stage, spark-proof vacuum pump for A1, A2, A2L, A3 and NH₃ refrigerants. With a flow rate of 151 l/min, a final vacuum of 0.033 mbar, a 1/2 PS motor, a solenoid valve, a gas ballast valve and a weight of 11 kg, it is ideally suited for evacuation, servicing and commissioning in refrigeration and air-conditioning systems. Technical data Manufacturer CPS Products Type VPB6D Series Black Max Equipment type Intrinsically safe vacuum pump Model Two-stage Suitable refrigerant classes A1, A2, A2L, A3, NH3/R717 Flow rate 151 l/min at 50 Hz Ultimate vacuum 0.033 mbar / 25 microns Motor power 1/2 PS / 368 W Motor speed 2,880 / 3,440 rpm Supply voltage 115 V / 230 V, 50/60 Hz Connection size 1/4", 5/16", 3/8" SAE Cable length 3 m Operating temperature 0 °C to 52 °C Oil capacity 0.54 l Oil capacity approx. 470–540 ml, depending on the data source Dimensions approx. 350 x 140 x 260 mm Weight 11 kg Features Two-stage pump technology Spark-proof, sealed electronics Integrated solenoid valve Gas ballast valve Easily accessible oil drain Double-sealed sight glass made of real glass Permanently attached 3-metre mains cable Robust Black-Max construction Suitable for A1 refrigerants A2 refrigerants A2L refrigerants such as R32, R1234yf and R454C A3 refrigerants such as R290 and R600a NH3 / R717 Servicing of refrigeration and air-conditioning systems Heat pump servicing Scope of delivery CPS VPB6D Black Max vacuum pump Permanently fitted mains cable Oil for initial filling Note on oil and maintenance Vacuum pump oil should be clean and free from moisture, acids and contaminants. To ensure a long service life and reliable vacuum performance, the oil should be checked regularly and changed as required.

Refco manual shut-off valve (ball valve) CA-1/4 "SAE-B (4493525) on blue filling hose The Refco manual shut-off valve (ball valve) CA-1/4 "SAE-B (4493525) is a high-quality product for use in refrigeration, air conditioning and ventilation technology as well as heat pumps. It enables precise control of the refrigerant flow and is specially designed for professional use.Technical details: Thread: 1/4" SAE-B Length of the blue filling hose: 5 m Straight version Artikelnummer: 47-32-7001-23 Advantages and benefits: The Refco manual shut-off valve is characterised by the following advantages: Precise control of the refrigerant flow Easy handling and installation High-quality workmanship for a long service life

REFCO filling hose 9883281, yellow, 60 bar, CL-200-Y, 7/16"-20 UNF valve core pusher, 500 cm High-quality filling hose for all common refrigerants with 1/4" SAE fittings. The special rubber compound is extremely durable thanks to its high pressure resistance and low embrittlement. Twisted PTFE seals are secured in the union nuts with a snap system and protected against blow-outs. Features Replaceable PTFE seal with blow-out protection High-quality hose compound: maximum service life, resistant to hardening/brittleness Fluted union nuts for secure manual tightening 14 mm hexagon for 1/4" SAE (16 mm for 1/2"-20 UNF) Integrated 7/16"-20 UNF valve core pusher Specifications Inlet: 1/4" SAE, 45° bent Outlet: 1/4" SAE Colour: yellow Length: 5000 mm (5 m) Hose diameter: 6.35 mm (1/4") Working pressure: 60 bar (according to type CL-200-Y) Maximum/burst pressure: 300 bar Materials: brass, rubber Note: Some documents may state "max. operating pressure 300 bar"; the industry standard is 60 bar working pressure and 300 bar burst pressure. Please check project-specific requirements.