-
Cold
- Compressor
- Condensing units
- Evaporator & Condenser
- Catering refrigeration technology
- Monoblocks & refrigeration sets
- Tool refrigeration
- Motors & Fans
- Solenoid and control valves
- Assembly material for refrigeration
- Chemistry Refrigeration
- Circuit parts
- Cold store
- Switchgear & Co
- Spare parts for household appliances
- Climate
- Ventilation
- Heat pumps
- Tools
- Promotional merchandise
- B2B Suite
- Enquiry form
- Manufacturer
Which evaporator suits your cold room?
Choose by cooling capacity at your room temperature and ΔT, defrost and air throw; for a replacement, by the type number on the rating plate.
Choose by cooling capacity at your room temperature and ΔT, defrost and air throw; for a replacement, by the type number on the rating plate.
- Below about +2 °C room temperature, off-cycle defrost is usually not enough; then the evaporator needs electric or hot gas defrost.
- For low temperature, choose larger fin spacing (usually 6–7 mm) so that frost does not block the fins as quickly.
- The fan's air throw should roughly match the room depth so that the cold air reaches the whole room.
Filter products
More filters (17) Fewer filters
Do you have some questions about this products?
- Your personal contact person
- Ipek Gülen
- [email protected]
- +49 2554 912 983 9
-
🙋 Ipek Gülen
Not found what you are looking for?
You need Individual Solutions or larger Quantities?
Rivacold
Rivacold SBT6170/75 static evaporator – KT-RV-SBT6170-75 – R404A – 350 W – 11 mm fin spacingAvailable
Walter Roller
Roller VW 2 EC PLUS fan air cooler for refrigerated cabinets 0015855, LA=4.5 mm, air volume flow: 200 m³/h, without defrost heater- Air flow
- 200 m³/h
- Fin spacing
- 4.5 mm
Available
LU-VE Contardo
Evaporator LU-VE F35HC117E6, 6800 W, fan 2x350 mm, defrosting- Voltage
- 230V
- Air flow
- 5300 m³/h
Available
Walter Roller
Roller DLKT 7841 EC Next Roller ceiling-mounted air cooler 0015505, LA=7mm, fan: 1x- Fin spacing
- 7 mm
- Number of fans / fan blades
- 1x
Available
Walter Roller
Roller HVST 705 ES air cooler 0010423, LA=7 mm, air volume flow: 2760 m³/h- Air flow
- 2760 m³/h
- Fin spacing
- 7 mm
Available
Walter Roller
Roller ceiling-mounted air cooler DLK 432 EC, 0013685, LA=4 mm, air volume flow: 1700 m³/h, fan:1x- Air flow
- 1700 m³/h
- Fin spacing
- 4 mm
Available
Walter Roller
Roller ceiling-mounted air cooler DLKT 732 EC, 0014620, for A2L / A3 refrigerant LA=7 mm, air flow rate: 1880 m³/h, , with defrost heater- Air flow
- 1880 m³/h
- Fin spacing
- 7 mm
Available
Modine / ECO / Luvata
Evaporator ECO MIC401, 3.36 kW, fan 4x230 mm- Voltage
- 230V
- Temperature range
- -25 °C (-35 to +40)
Available
Kelvion / Küba
Kelvion 100450800 MSA 03-1X2A Basic unit axial condenser without fansAvailable
Kelvion / Küba
Air cooler Goedhart CCD 32404E, 10.5 kW, fan 2x400 mm, electric defrosting- Voltage
- 230V
- Temperature range
- -30 to +20
Available
Kelvion / Küba
Kelvion Küba fan unit spare part VRE.FN040-4EK.OF.V7P1 for SG 071-082 D 100304971Available
Walter Roller
Roller DLKT613EC Flatline 0013726 flat ceiling air cooler LA=6mm with heaterAvailable
We determine the availability shown in this list from current stock and restocking times, regardless of the delivery country. We calculate the estimated delivery date for your delivery country on the product page and in the cart.
Can't find what you are looking for?
Send us a photo of the nameplate. We will check the successor type and availability.
Request a replacement →