Sight glass Carly VCYL 34 MMS solder connection 12 mm

Sight glass Carly VCYL 33 MMS solder connection 10 mm Functional features: - Maximum operating pressure: 42 bar - Compatible with CHCs, CFCs, HFCs, CO2, as well as with their oils and associated additives - The glass size enables excellent visibility without the need for a that a central, hygroscopic bead impairs this. impaired. - The mounting design of the humidity indicator is such that it is designed so that it is not subject to wear, contamination oils and no residues in the refrigerant circuit. residues in the refrigerant circuit. It prevents turbulence, which which could have an unfavourable effect on the visibility of the refrigerant and does not cause a drop in pressure. - The monobloc design and the perfectly fitted viewing window window guarantee absolute tightness. - The low weight of the VCYL sight glasses means that no special fastening is required. - The base body of the sight glasses is made of brass and thus guarantees complete complete corrosion resistance. - The long copper soldering ends of the sight glasses allow the connections to be soldering of the connections. The solid construction of the base body/sight glass unit unit does not require disassembly of the glass. - Several types of connections are possible on the standard products: - Screw connection type SAE, Male/Male and Male/Female - For soldering on tubes in millimetres (MMS), female/female and male/female Application: - For quick and direct control of the flow rate, condition and moisture and moisture content of the refrigerant in liquid or two-phase two-phase state in refrigeration and air conditioning systems. Further information can be found in the data sheet above.

Product description: Sight glass Carly VCYL 32 MMS solder connection 6 mm Introduction: The Carly VCYL 32 MMS sight glass is a high-quality product for quickly and directly checking the flow, condition and moisture content of the refrigerant in refrigeration and air conditioning systems. It is perfect for professionals in refrigeration, air conditioning and ventilation technology as well as in the heat pump sector.Technical features: Maximum operating pressure: 42 bar Compatible with CHCs, CFCs, HFCs, CO2 and their oils and additives Excellent visibility due to glass size without hygroscopic beads Fixed construction prevents wear and pressure drop Monobloc construction for absolute tightness Brass body for corrosion resistance Easy soldering of the connections thanks to long copper soldering ends Various connection types possible: screw connection, soldering on pipes Sales-promoting contents: 1. the VCYL sight glasses guarantee reliable monitoring of the refrigerant without the need for time-consuming fastening. 2. the robust design and high-quality materials ensure a long service life and safe use in various systems 3. thanks to the clear view of the sight glass, problems can be recognised and rectified at an early stage, resulting in an efficient and reliable refrigeration and air conditioning system.

Sight glass Carly VCYLS 5 for soldering to 5/8"Functional features:- The products are compatible with CHCs, CFCs, HFCs, CO2, as well as with their oils and associated additives. They are designed for use with non-hazardous refrigerants of group 2 of PED 2014/68/EU. For the use of CARLY components with Group 1 fluids of the hydrocarbon type - propane R290, butane R600, isobutane R600a, propylene R1270 - with HFCs and transcritical CO2 and for an application of organic cycle of RANKINE, please contact CARLY technical service. - The classification of products according to their nominal size in EC categories is shown in the table of PED 2014/68/EU. - Monitoring of the refrigerant condition in the liquid line by means of a large inspection window. The possible presence of bubbles in the refrigerant is visualised by the VCYL and, in addition to a lack of refrigerant, can have various causes such as too low or no subcooling, high pressure loss through the filter drier, which in this case must be replaced immediately. - A reliable hygroscopic indicator that reacts to moisture and is resistant to acid is positioned under the sight glass. - Moisture is indicated by a colour change of the indicator (green = refrigerant dry, yellow = refrigerant too moist) The continuous indication is tried and tested, as is the reversible colour change. It is very important to check the moisture content of the refrigerant in order to avoid the formation of acid, which is detrimental to the proper functioning of the system. - The sight glass consists of three parts: - a brass plate, which is soldered directly onto the pipework after it has been drilled. - a sight glass with moisture indicator, which is screwed onto the plate.- an O-ring seal made of PTFE, which ensures tightness between the plate and sight glass.Application: - For quick and direct monitoring of the flow rate, condition and moisture content of the refrigerant in liquid or two-phase state in refrigeration and air conditioning systems.For more information, see the data sheet above.

Sight glass Carly VCYL 36 MMS Solder connection 18 mmFunctional features: - Maximum operating pressure: 42 bar - Compatible with CHCs, CFCs, HFCs, CO2, as well as with their oils and associated additives - The glass size allows excellent visibility without a central hygroscopic bead impairing this.- The mounting design of the humidity indicator is such that it is not subject to wear, contamination by oils or residual substances in the refrigerant circuit. It prevents turbulence that could have an unfavourable effect on the good visibility of the refrigerant and does not cause a drop in pressure. - The monobloc design and the perfectly fitted inspection window guarantee absolute tightness. - The two flare connections are provided with a hexagonal spanner flat for easy installation and screwing in. - The male / female sight glasses for flanging are supplied with a centring copper gasket on the female side (except VCYL 25, where a non-centring copper gasket is included), which enables quick and secure positioning. - The male / female sight glasses can be screwed directly onto the outlet side of a filter drier. - Due to the low weight of the VCYL sight glasses, no special fastening is required. - The base body of the sight glasses is made of brass, guaranteeing complete corrosion resistance. - Several types of connections are possible on the standard products: - Screw connection type SAE, Male/Male and Male/Female - For soldering on tubes in millimetre (MMS), Female/Female and Male/Female Application: - For quick and direct control of flow, condition and moisture content of the refrigerant in liquid or two-phase state in refrigeration and air conditioning systems. For more information, see the data sheet above.

Sight glass Carly VCYL 55 S/MMS Solder connection 5/8" - 16 mmFunctional features: - Maximum operating pressure: 42 bar - Compatible with CHCs, CFCs, HFCs, CO2, as well as with their oils and associated additives - The glass size enables excellent visibility without being impaired by a central hygroscopic bead.- The mounting design of the humidity indicator is such that it is not subject to wear, contamination by oils or residual substances in the refrigerant circuit. It prevents turbulence that could have an unfavourable effect on the good visibility of the refrigerant and does not cause a drop in pressure. - The monobloc design and the perfectly fitted inspection window guarantee absolute tightness. - The two flare connections are provided with a hexagonal spanner flat for easy installation and screwing in. - The male / female sight glasses for flanging are supplied with a centring copper gasket on the female side (except VCYL 25, where a non-centring copper gasket is included), which enables quick and secure positioning. - The male / female sight glasses can be screwed directly onto the outlet side of a filter drier. - Due to the low weight of the VCYL sight glasses, no special fastening is required. - The base body of the sight glasses is made of brass, guaranteeing complete corrosion resistance. - Several types of connections are possible on the standard products: - Screw connection type SAE, Male/Male and Male/Female - For soldering on tubes in millimetre (MMS), Female/Female and Male/Female Application: - For quick and direct control of flow, condition and moisture content of the refrigerant in liquid or two-phase state in refrigeration and air conditioning systems. For more information, see the data sheet above.