Soldering adapter for flaring and soldering Carly KRCY 3 S, 3/8" SAE x 3/8" ODF Introduction: The Carly KRCY 3 S soldering adapter is the ideal solution for connecting pipe components in refrigeration, air conditioning and ventilation systems and heat pumps. Thanks to its high airtightness, fast installation speed and improved component replacement options, it offers an efficient and reliable solution for your applications.Technical details: Maximum operating pressure: 46 bar Suitable for HFCs, CFCs, CHCs, CO² and corresponding oils and additives Soldering adapter consisting of brass tube, brass nut and copper seal Applicable with SAE flare connection in refrigeration and air conditioning systems Developed in accordance with PED 2014/68/EU for non-hazardous refrigerants of group 2 Advantages and benefits: The Carly KRCY 3 S soldering adapters offer you the following benefits: Higher airtightness compared to conventional connections Fast installation speed for efficient installation Enable more frequent and cost-effective replacement of components without damaging the pipework Ensure perfect tightness even after multiple replacements for smooth service calls For more detailed information, please refer to the data sheet above.

Soldering adapter for flaring x soldering Carly KRCY 6 S 3/4" BSP SAE - 3/4" ODFVoretile: - Maximum operating pressure 46 bar.- Compared to conventional connections (flaring of the copper pipe), the soldering adapters offer: a higher airtightness faster installation speed allow more frequent and cheaper replacement of components without damaging or deforming the pipework, which are often the cause of refrigerant leaks.Functional features:- The products can be used with HFCs, CFCs, CHCs and CO² as well as with all associated oils and additives. The products are designed for use with non-hazardous refrigerants of group 2 PED 2014/68/EU. For use of Carly components with hydrocarbon group 1 fluids - Propane R290, Butane R600, Isobutane R600a, Propylene R1270 with HFO's and transcritical CO² and for ORC application please contact Carly technical department.- The product classification in CE categories is according to the PED 2014/68/EU table, depending on the nominal diameter- The soldering adapters consist of a brass tube for soldering, a brass nut and a copper gasket with centring aid (except KRCY 6 S/MMS)- The brass tube is soldered to the tube at the soldering end and screwed to the component with the nut at the other end; the guided copper gasket is inserted into the specially designed recess on the flared side.- Each size is supplied in plastic bags of 10 complete sets. To prevent any damage, the 10 copper seals are packed separately in a cardboard box.Application: - The soldering adapters can be used for all pipe components with SAE flared connections in refrigeration and air conditioning systems. - They guarantee perfect tightness even after repeated replacement of the components and thus simplify service work.For more information, see the data sheet above