Copper pipe insulated, d= 6 / 12 mm, thickness 1 mm, packaging 20 m (article number: 69-6519291) This insulated copper pipe is perfect for use in cooling, air conditioning and ventilation systems as well as in heat pumps. It offers a wide range of applications and is an essential accessory for heating and cooling systems.Technical details: Diameter: 6 / 12 mm Thickness: 1 mm Packaging: 20 m Fire protection class: B2 Sales-promoting contents: Thanks to its insulated coating, this copper pipe ensures efficient heat transfer while protecting against condensation. Thanks to its fire protection class B2, it is particularly safe to use and meets high standards in terms of safety and quality.

Pre-insulated CU pipe d = 1/4" (6 mm), wall thickness 1.0 mm, roll of 50 m

Presentation video HVAC Super Pro Kit LONG-LASTING LOOSE BONDING FOR COPPER, BRASS AND ALUMINIUM Makes hundreds of bonds Creates the same number of bonds as 670 g (1 1/2 lbs) solder at about 25% of the cost of 15% silver solder Use with standard copper or brass fittings Single component formula – Easy to apply and no mixing required The bottle has a shelf life of at least 12 months after opening Uses standard ASE fittings – no expensive tools or special fittings required For all repairs and new installations Eliminates the risk of damage from fire and burns Compatible with all refrigerants and oils TECHNICAL DATA: Compatible with all refrigerants and oils Holds a refrigerant pressure of 850 psi/59 bar 12 minutes after bonding (20 minutes for aluminium) Holds 1200 psi/84 bar refrigerant pressure – fully cured Bonding time in 1 minute for aluminium and is set in 4 minutes Ca. 2 hours is fully cured and withstands a refrigerant pressure of 84 bar/1200 psi Set-up begins in 20 seconds and forms a solid connection in 3 minutes Makes approximately 200 connections on ½”pipes Temperature range 54° to 176°C (-65° to 350°F) Adhesive strength (ASTM 4541): Pull apart 1500 foot-pounds/207 kg-metres, rotation 450 foot-pounds/62 kg-metres Extended shelf life of 3 years* *As with any product, effectiveness can and will diminish when exposed to the elements. It is recommended to store HVAC Super Pro after opening with the cap removed until the technician has finished their work. This will ensure that the product is exposed to oxygen. When closing the bottle, wipe the spilled HVAC Super Pro off the cap and bottle, close the bottle tightly and store it upright. Depending on temperature and humidity, HVAC Super Pro will remain stable for a longer period of time. The chemical reaction takes place in the absence of oxygen. Therefore, the bottle is only 1/3 full on delivery. 

Pre-insulated CU pipe d = 5/8" (16 mm), wall thickness 1.0 mm, roll of 50 m

Pre-insulated CU pipe d = 1/4"- 5/8" x 0.8-1.0 mm (6/16 mm), roll of 25 m