Copeland ZP32K3E-TFD-522 Scroll Compressor for Air Conditioning/Heat Pumps R410A – not available, replaced by ZP31KSE-TFM-522

Copeland ZH06K1P-TFM-524 Scroll Compressor for Heat Pumps, R410A The Copeland ZH06K1P-TFM-524 is a fixed-speed heating compressor designed for heat pump and reversible applications using R410A. It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. Copeland ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A) The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kW ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression This extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilers Axial and radial flexibility of the scrolls ensures high reliability High efficiency and increased heating capacity, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.2 × 24.2 × 42.2 cm Application range HBP Application range HT Number of phases 3 Design Hermetic dB(A) @ 1 m 62 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 40 Frequency 50 Hz Weight 31 Airflow 5.13 m³/h Cooling capacity (kW) 7.62 Refrigerant R410A Capacity under operating conditions: 7.2°C evap, temp; 54.4°C cond, temp; 410A at 50 Hz Max. operating current (A) 6 Motor code TFM Oil pre-filled Oil quantity (l) 1.24 Oil type: POE Product family ZH Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem configurations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Copeland ZP31KSE-TFM-522 Scroll Compressor for Air Conditioning/Heat Pumps R410AThe Copeland ZP scroll compressor for R410A is designed for comfort and precision cooling. It is particularly suitable for air-cooled chillers up to approx. 600 kW (up to approx. 730 kW for water-cooled systems) and offers high seasonal efficiency (SEER/SEPR/SCOP) whilst maintaining compact dimensions.ZP compressors can be used in single, tandem and trio configurations, making them highly flexible in system designThe ZP104, ZP122 and ZP143KCE models for light commercial applications have a reduced footprint and low weight, enabling compact, efficient systems with low operating costsCertified tandem and trio combinations (including mixed combinations) for high seasonal efficiencyCopeland Scroll technology with axial and radial flexibility for high reliability and efficiencyExtended operating range (suitable for heat pump applications, amongst others)Extensive range of R410A scroll units with low noise and vibration levelsLow oil carry-overMaximum permissible operating pressure (PS):ZP24 to ZP91: ND 29.5 bar(g) / HD 45 bar(g)ZP104 to ZP485: ND 29.5 bar(g) / HD 45 bar(g)Technical detailsDimensions (length × width × height) 24.2 × 24.2 × 38.8 cmHBP application rangeApplication range ACNumber of phases 3Design HermeticdB(A) @ 1 m 55Pressure line (inches) 1/2"Electronics includedRecommended crankcase heater 40Frequency 50 HzWeight 22Displacement 5.13 m³/hCooling capacity (kW) 6.50Refrigerant R410ACapacity under operating conditions: 5°C evaporator temperature; 50°C condenser temperature; 10 K suction superheat; 0 K subcooling for R-410A at 50 HzMax. operating current (A) 6Motor code TFMOil pre-filledOil quantity (l) 0.74Oil type: POEProduct family ZPSuction pipe (inches) 3/4"Compression type: ScrollSupply voltage 380–420 VAdvantages and benefitsHigh seasonal efficiency thanks to certified tandem and trio combinationsFlexibility in system design thanks to various configurationsLow noise and vibration levels for quiet operationReduced footprint and low weight enable compact installations Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Copeland ZP32KCE-TFD-522 Scroll Compressor for Air Conditioning/Heat Pumps R410AThe Copeland ZP scroll compressor for R410A is designed for comfort and precision cooling. It is particularly suitable for air-cooled chillers up to approx. 600 kW (up to approx. 730 kW for water-cooled systems) and offers high seasonal efficiency (SEER/SEPR/SCOP) whilst maintaining compact dimensions.ZP compressors can be used in single, tandem and trio configurations, making them highly flexible in system designThe ZP104, ZP122 and ZP143KCE models for light commercial applications have a reduced footprint and low weight, enabling compact, efficient systems with low running costsCertified tandem and trio combinations (including mixed combinations) for high seasonal efficiencyCopeland Scroll technology with axial and radial flexibility for high reliability and efficiencyExtended operating range (suitable for heat pump applications, amongst others)Extensive range of R410A scroll units with low noise and vibration levelsLow oil carry-overMaximum permissible operating pressure (PS): ZP24 to ZP91: ND 29.5 bar(g) / HD 45 bar(g)Maximum permissible operating pressure (PS): ZP104 to ZP485: ND 29.5 bar(g) / HD 45 bar(g)Technical detailsHBP application rangeApplication range ACNumber of phases: 3Design: HermeticdB(A) @ 1 m 56Pressure line (inches) 1/2"Electronics includedFrequency 50–60 HzWeight 28.1Displacement 5.34 m³/hCooling capacity (kW) 6.73Refrigerant R410ACapacity under operating conditions: 5°C evaporator temperature; 50°C condenser temperature; 10 K suction superheat; 0 K subcooling for R-410A at 50 HzMax. operating current (A) 6Motor code TFDOil pre-filledOil quantity (l) 1.24Oil type: POEProduct family ZPSuction line (inches) 3/4"Compression type: ScrollSupply voltage 380–420 VSupply voltage 460 VAdvantages and benefitsHigh seasonal efficiency thanks to certified Tandem and Trio combinationsHigh reliability and efficiency thanks to Copeland Scroll technologyFlexibility in system design thanks to various configurationsLow noise and vibration levels for quiet operation Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified specialist.Electronics: The electronics are included in the scope of supply.

Copeland ZP32K3E-PFJ-522 Scroll Compressor for Air Conditioning/Heat Pumps R410AThe Copeland ZP scroll compressor for R410A is designed for comfort and precision cooling. It is particularly suitable for air-cooled chillers up to approx. 600 kW (up to approx. 730 kW for water-cooled systems) and offers high seasonal efficiency (SEER/SEPR/SCOP) whilst maintaining compact dimensions. ZP compressors can be used in single, tandem and trio configurations, making them highly flexible in system design.Certified tandem and trio combinations (including mixed combinations) for high seasonal efficiencyCopeland scroll technology with axial and radial flexibility for high reliability and efficiencyExtended operating range (suitable for heat pump applications, amongst others)Wide range of R410A scroll compressors with low noise and vibration levelsLow oil carry-overMaximum permissible operating pressure (PS): ZP24 to ZP91: ND 29.5 bar(g) / HD 45 bar(g)Maximum permissible operating pressure (PS): ZP104 to ZP485: ND 29.5 bar(g) / HD 45 bar(g)Technical detailsHBP application rangeApplication range ACNumber of phases: 3Design: HermeticdB(A) @ 1 m 56Pressure line (inches) 1/2"Electronics includedFrequency 50–60 HzWeight 28.1Displacement 5.34 m³/hCooling capacity (kW) 7.49Refrigerant R410ACapacity under operating conditions: 5°C evap, temp; 50°C cond, temp, for R410A at 50 HzMax. operating current (A) 19Motor code PFJOil pre-filledOil quantity (l) 1.24Oil type: POEProduct family ZPSuction pipe (inches) 3/4"Compression type: ScrollSupply voltage 220–240 VSupply voltage 265VAdvantages and benefitsHigh seasonal efficiency thanks to certified combinationsHigh reliability and efficiency thanks to Copeland Scroll technologyFlexibility in system design thanks to various configurationsLow noise and vibration levels for quiet operation Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified specialist.Electronics: The electronics are included in the scope of supply.