Copeland ZR19M3E-TWD-961 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407C – not available, replaced by ZR190KCE-TFD-455

Copeland ZR40K3E-TFD-522 scroll compressor for air-conditioning and refrigeration applications ``` The Copeland ZR40K3E-TFD-522 is a hermetic scroll compressor for air-conditioning, heat pump and refrigeration systems. With a cooling capacity of approx. 8.22 kW, this three-phase compressor is particularly suitable for comfort air conditioning, process cooling, chillers, rooftop air conditioning units and precision air conditioning systems. The tried-and-tested scroll technology uses few moving parts and thereby enables quiet, low-vibration and efficient operation. The axial and radial flexibility of the scroll coils ensures a high level of operational reliability and protects the compressor in the event of brief liquid or contaminant ingress. Advantages of the Copeland ZR40K3E-TFD-522 High efficiency: COP of 3.03 under the specified operating conditions Quiet operation: low noise and vibration levels Reliable scroll technology: axial and radial flexibility of the scroll coils Low oil carry-over: supports stable and efficient system operation Wide range of applications: suitable for AC, HBP and MBP applications Flexible power supply: for 380–420 V at 50 Hz and 460 V at 60 Hz Factory-filled: POE oil is already contained within the compressor Electronics included: the required electronics are supplied as standard Typical applications The Copeland Scroll compressor can be used in the following systems, amongst others: Chillers and liquid coolers Roof-mounted air-handling units and central air-conditioning systems Precision air-handling units and server room cooling Process and commercial refrigeration Air conditioning and heat pump applications Single-compressor units and approved tandem and trio configurations The tried-and-tested Copeland ZR series The Copeland ZR series covers a wide range of capacities for air conditioning, process and precision cooling. For higher capacity requirements, Copeland certified tandem and trio combinations are available. This enables the creation of systems with high seasonal efficiency and demand-based capacity control. Depending on the specific model and application, the series is available for various refrigerants such as R407C, R134a and R513A. For the ZR40K3E-TFD-522, the technical product data provided here lists R134a, R407C and R22. The specific refrigerant approval must be verified prior to use, referring to the latest Copeland documentation and the intended operating conditions. Installation notes The compressor is supplied from the factory with 1.10 litres of POE oil. Refrigerant is not included. Installation, pressure testing, evacuation and refrigerant charging must only be carried out by a suitably qualified specialist contractor. A crankshaft housing heater with a power rating of 70 W is recommended. A crankshaft housing heater is only included in the scope of supply if it is expressly listed in the scope of supply of the quotation. Technical data Manufacturer Copeland Model ZR40K3E-TFD-522 Product family ZR Compression type Scroll Design Hermetic Areas of application AC, HBP and MBP Refrigerant according to data sheet R134a, R407C and R22 Cooling capacity 8.22 kW Power consumption 2.71 kW COP 3.03 Displacement 9.43 m³/h Operating conditions +5 °C evaporation, +50 °C condensation, 10 K suction gas superheat and 0 K subcooling, R407C at 50 Hz Motor code TFD Phases 3 Supply voltage 380–420 V / 50 Hz and 460 V / 60 Hz Frequency 50–60 Hz Max. operating current 7 A Max. operating pressure (low/high pressure) 20 / 29.5 bar(g) Suction pipe 3/4 inch Discharge pipe 1/2 inch Oil type POE Oil capacity 1.10 l Oil fill Pre-filled at the factory Recommended sump heater 70 W Sound pressure level at 1 m 57 dB(A) Sound power level 71 dB(A) Protection class IP21 Dimensions L × W × H 24.2 × 24.2 × 40 cm Weight 27 kg Electronics Included in the scope of delivery Refrigerant charge Not included Important note Before placing your order, please check the full model designation, the motor code, the connections, the voltage and the intended operating point against the existing compressor or the system documentation. ```

Oil sump heater 70 W for Copeland compressors The oil sump heater with heating cable and clamp is a replacement for the Copeland 8561058 heating cable. With an output of 70 W and a voltage of 230 V, it is ideal for use in various Copeland scroll compressors. The heating cable has a length of 54.5 cm and the total length is 160 cm. The diameter varies between 255 mm and 300 mm. Compatible Copeland compressors Compressor 47-32ZB56: 70 W, 283 mm Compressor 47-32ZB92: 70 W, 283 mm Compressor 47-32ZF24: 70 W, 283 mm And other models... Sales-promoting content The oil sump heater is the ideal solution for reliable and efficient heating of the oil sump in Copeland compressors. With an output of 70 W, it ensures a constant temperature and prevents the oil from freezing. This extends the service life of the compressor and minimises downtime. Thanks to its simple installation and high-quality workmanship, the oil sump heater is a cost-effective and reliable solution for operating refrigeration and air conditioning systems with Copeland compressors.

Copeland ZR16M3E-TWD-961 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407CThe Copeland ZR scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chillers, rooftop air-handling units and precision air-handling units. By using multiple Copeland-certified tandem and trio combinations, higher capacities can also be achieved with high seasonal efficiency.Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134aTypical applications include chillers, rooftop air-handling units and precision air-handling unitsBy using multiple Copeland-certified tandem and trio combinations, even higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can be achieved with high seasonal efficiencySpecial ZR models for R513A (GWP 631) are available to meet current requirements for low GWP valuesThe series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reductionAxial and radial flexibility of the scrolls ensures high reliability and efficiencyExtensive ZR range for R407C, R134a and R513ALow TEWI (Total Equivalent Warming Impact)Low noise and vibration levelsLow oil carryoverCopeland-certified tandem and trio configurations for high seasonal efficiencyMaximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g)Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g)Technical detailsAC application rangeApplication range HBPMBP application rangeNumber of phases: 3Design: HermeticdB(A) 69Pressure line (inches) 1 1/4"Electronics includedFrequency 50–60 HzWeight 103Displacement 35.5 m³/hCooling capacity (kW) 32.2Refrigerant R134ARefrigerant R22Refrigerant R407CCapacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 HzMax. operating current (A) 27Motor code TWDOil pre-filledOil quantity (l) 4.1Oil type: POEProduct family ZRSuction pipe (inches) 1 3/4"Compression type: ScrollSupply voltage 380–420 VSupply voltage 460VAdvantages and benefitsHigh reliability and efficiency thanks to the axial and radial flexibility of the scrollsLow noise and vibration levels ensure quiet operationOptimal system adaptation and cost reduction thanks to low overheatingHigh seasonal efficiency thanks to certified tandem and trio configurations Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.