Copeland ZR310KCE-TWD-523 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407C

Copeland ZR34K3E-PFJ-522 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407C The Copeland ZR34K3E-PFJ-522 scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chilled water chillers, rooftop air-conditioning units and precision air-conditioning units. Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a Typical applications include chillers, rooftop air-handling units and precision air-handling units By using several Copeland-certified tandem and trio combinations, higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can also be achieved with high seasonal efficiency Special ZR models for R513A (GWP 631) are available to meet current requirements for low GWP values The series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reduction Axial and radial flexibility of the scrolls ensures high reliability and efficiency Extensive ZR range for R407C, R134a and R513A Low TEWI (Total Equivalent Warming Impact) Low noise and vibration levels Low oil carryover Copeland-certified tandem and trio configurations for high seasonal efficiency Maximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g) Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.6 × 24.6 × 40 cm Application range AC Application range HBP MBP application range Number of phases 1 Design: Hermetic COP 2.98 dB(A) @ 1 m 57 dB(A) 68 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50–60 Hz Weight 28.5 Airflow 83 m³/h Cooling capacity (kW) 74 Refrigerant R134A Refrigerant R22 Refrigerant R407C Capacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 Hz Power consumption [kW] 2.37 Max. operating current (A) 17.3 Max. operating pressure (low/high) [bar(g)] 20/29.5 Motor code PFJ Oil pre-filled Oil capacity (l) 1.10 Oil type POE Product family ZR Suction pipe (inches) 3/4" Protection class IP21 Compression type: Scroll Supply voltage 220–240 V Supply voltage 265 V Advantages and benefits High reliability and efficiency thanks to the axial and radial flexibility of the scrolls Low noise and vibration levels ensure quiet operation Optimal system adaptation and cost reduction thanks to low overheating High seasonal efficiency thanks to certified tandem and trio configurations Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Copeland ZR380KCE-TWD-523 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407C The Copeland ZR scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chillers, rooftop air-handling units and precision air-handling units. By using multiple Copeland-certified tandem and trio combinations, higher capacities can also be achieved with high seasonal efficiency. Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a Typical applications include chillers, rooftop air-handling units and precision air-handling units By using multiple Copeland-certified tandem and trio combinations, even higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can be achieved with high seasonal efficiency Special ZR models for R513A (GWP 631) are available to meet current requirements for low GWP values The series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reduction Axial and radial flexibility of the scrolls ensures high reliability and efficiency Extensive ZR range for R407C, R134a and R513A Low TEWI (Total Equivalent Warming Impact) Low noise and vibration levels Low oil carryover Copeland-certified tandem and trio configurations for high seasonal efficiency Maximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g) Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 44.7 × 42.7 × 71.5 cm Application range AC Application range HBP MBP application range Number of phases 3 Design: Hermetic COP 3.4 dB(A) @ 1 m 76 Pressure line (inches) 1 3/4" Electronics included Recommended crankcase heater 150 Frequency 50–60 Hz Weight 176.9 Airflow 87.5 m³/h Cooling capacity (kW) 80.01 Refrigerant R134A Refrigerant R22 Refrigerant R407C Capacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 Hz Max. operating current (A) 62 Motor code TWD Oil pre-filled Oil quantity (l) 6.30 Oil type: POE Product family ZR Suction pipe (inches) 2 1/4" Compression type: Scroll Supply voltage 380–420 V Supply voltage 460V Advantages and benefits High reliability and efficiency thanks to the axial and radial flexibility of the scrolls Low noise and vibration levels ensure quiet operation Optimal system adaptation thanks to low overheating High seasonal efficiency thanks to certified tandem and trio configurations Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified service centre.Electronics: The electronics are included in the scope of supply.

Compressor oil Emkarate RL32-3MAF (POE 1.0 l), ISO 32, viscosity Introduction: Emkarate RL32-3MAF compressor oil is a synthetic polyoester (POE) lubricant specially developed for use in compressors of refrigeration and air conditioning systems and heat pumps with HFC refrigerants. It ensures effective wear protection for steel and aluminium surfaces, which increases the service life of the entire system. With improved efficiency features, it is suitable for both the initial filling and the service refilling process of the compressor.Technical details: Density at 20 °C: 0.981 g/ml Flash point (according to Clev.): 240 °C Kin. Viscosity at 40 °C: 31.2 mm2/s Kin. Viscosity at 100 °C: 5.6 mm2/s Viscosity index (VI): 125 Pour point: -40 °C Type: synthetic refrigeration oil Type designation: RL323MAF1L Viscosity (max.): 32 cSt Advantages and benefits: The Emkarate RL32-3MAF provides an effective wear protection solution for bearing surfaces, extending system life and increasing efficiency. With its excellent low temperature properties and high chemical and thermal stability, this product is suitable for a wide operating temperature range. The ester oil optimises the performance of Copeland compressors and provides reliable lubrication, contributing to system efficiency and longevity. Info: Öl: Compressor is pre-filled with Öl at the factory. Refrigerant is not included and must be filled by a specialised company. Electronics: The electronics are included in the scope of delivery.

Refrigeration oil Emkarate RL32-3MAF, 5l Introduction: Emkarate RL32-3MAF is a synthetic refrigeration oil specially developed for use in compressors of refrigeration and air conditioning systems and heat pumps with HFC refrigerants. It ensures effective wear protection for steel and aluminium surfaces and thus increases the service life of the entire system. With its excellent low-temperature properties and chemical stability, it is the recommended oil for all Copeland compressors.Technical details: Density at 20 °C: 0.981 g/ml Flash point according to Clev.: 240 °C Kin. Viscosity at 40 °C: 31.2 mm2/s Kin. Viscosity at 100 °C: 5.6 mm2/s Viscosity index (VI): 125 Pour point: -40 °C Advantages and benefits: 1. improved efficiency: the Emkarate RL32-3MAF increases the performance and efficiency of your refrigeration system, resulting in energy savings 2. long-lasting protection: its effective wear protection extends the service life of your system and ensures reliable operation. 3. versatile application: The oil is suitable for both initial filling and service filling of compressors, which simplifies maintenance and saves costs. General information: Type: Synthetic refrigeration oil Short text: Emkarate ester oil RL32-3MAF POE machine oil in 5 litre canister Content: 5 litres

Copeland ZR250KCE-TWD-523 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407CThe Copeland ZR scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chillers, rooftop air-handling units and precision air-handling units. By using multiple Copeland-certified tandem and trio combinations, higher capacities can also be achieved with high seasonal efficiency.Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134aTypical applications include chillers, rooftop air-handling units and precision air-handling unitsBy using multiple Copeland-certified tandem and trio combinations, even higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can be achieved with high seasonal efficiencySpecial ZR models for R513A (GWP 631) are available to meet current requirements for low GWP valuesThe series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reductionAxial and radial flexibility of the scrolls ensures high reliability and efficiencyExtensive ZR range for R407C, R134a and R513ALow TEWI (Total Equivalent Warming Impact)Low noise and vibration levelsLow oil carryoverCopeland-certified tandem and trio configurations for high seasonal efficiencyMaximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g)Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g)Technical detailsDimensions (length × width × height) 43.2 × 37.6 × 71.7 cmApplication range ACApplication range HBPMBP application rangeNumber of phases 3Design: HermeticdB(A) @ 1 m 72Pressure line (inches) 1 3/8"Electronics includedRecommended crankcase heater 120Frequency 50–60 HzWeight 140Air flow rate 56.6 m³/hCooling capacity (kW) 52.2Refrigerant R134ARefrigerant R22Refrigerant R407CCapacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 HzMax. operating current (A) 42Motor code TWDOil pre-filledOil quantity (l) 4.70Oil type: POEProduct family ZRSuction pipe (inches) 1 5/8"Compression type: ScrollSupply voltage 380–420 VSupply voltage 460VAdvantages and benefitsHigh reliability and efficiency thanks to the axial and radial flexibility of the scrollsLow noise and vibration levels ensure quiet operationOptimal system adaptation and cost reduction thanks to low overheatingHigh seasonal efficiency thanks to certified tandem and trio configurations Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.