Copeland ZR61KCE-TFD-422 TANDEM Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407C

Copeland ZR61KCE-TFD-522 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407C The Copeland ZR scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chillers, rooftop air-handling units and precision air-handling units. Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a Typical applications include chillers, rooftop air-handling units and precision air-handling units By using multiple Copeland-certified tandem and trio combinations, higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can also be achieved with high seasonal efficiency Special ZR models for R513A (GWP 631) are available to meet current requirements for low GWP values The series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reduction Axial and radial flexibility of the scrolls ensures high reliability and efficiency Extensive ZR range for R407C, R134a and R513A Low TEWI (Total Equivalent Warming Impact) Low noise and vibration levels Low oil carryover Copeland-certified tandem and trio configurations for high seasonal efficiency Maximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g) Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.6 × 24.6 × 45.1 cm Application range AC Application range HBP MBP application range Number of phases 3 Design: Hermetic dB(A) @ 1 m 60 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50–60 Hz Weight 39 Air delivery 14.3 m³/h Cooling capacity (kW) 12.45 Refrigerant R134A Refrigerant R22 Refrigerant R407C Capacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 Hz Max. operating current (A) 11 Motor code TFD Oil pre-filled Oil quantity (l) 1.66 Oil type: POE Product family ZR Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Supply voltage 460V Advantages and benefits High reliability and efficiency thanks to the axial and radial flexibility of the scrolls Low noise and vibration levels ensure quiet operation Optimal system adaptation thanks to low overheating and special ZR models for low GWP values High seasonal efficiency thanks to Copeland-certified tandem and trio configurations Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified service engineer.Electronics: The electronics are included in the scope of supply.

Vibration damper KIT 8000822 for ZR/ZP22-72,ZF09-18,ZS21-45 Introduction: The vibration damper KIT 8000822 is the ideal accessory for Copeland compressors and condensing units. With this damper kit, you can effectively reduce vibrations and extend the service life of your refrigeration system. Suitable for the models ZR/ZP22-72, ZF09-18 and ZS21-45. Technical details: - Suitable for models: ZR/ZP22-72, ZF09-18, ZS21-45 - Contents: Vibration damper KIT 8000822 - Dimensions: 28mm solder, 330mm long - Manufacturer: Copeland Advantages and benefits: 1. effective reduction of vibrations and noise 2. extends the service life of your cooling system 3. high quality materials for reliable performance

Copeland ZR40K3E-PFJ-522 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407CThe Copeland ZR scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chilled water chillers, rooftop air-handling units and precision air-handling units.Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134aTypical applications include chillers, rooftop air-handling units and precision air-handling unitsBy using multiple Copeland-certified tandem and trio combinations, higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can also be achieved with high seasonal efficiencySpecial ZR models for R513A (GWP 631) are available to meet current requirements for low GWP valuesThe series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reductionAxial and radial flexibility of the scrolls ensures high reliability and efficiencyExtensive ZR range for R407C, R134a and R513ALow TEWI (Total Equivalent Warming Impact)Low noise and vibration levelsLow oil carryoverCopeland-certified tandem and trio configurations for high seasonal efficiencyMaximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g)Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g)Technical detailsDimensions (length × width × height) 24.2 × 24.2 × 40 cmApplication range ACApplication range HBPMBP application rangeNumber of phases 1Design: HermeticCOP 2.98dB(A) @ 1 m 57dB(A) 68Pressure line (inches) 1/2"Electronics includedRecommended crankcase heater 70Frequency 50–60 HzWeight 27Airflow 9.43 m³/hCooling capacity (kW) 8.28Refrigerant R134ARefrigerant R22Refrigerant R407CCapacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 HzPower consumption [kW] 2.78Max. operating current (A) 23.1Max. operating pressure ND/HD [bar(g)] 20/29.5Motor code PFJOil pre-filledOil capacity (l) 1.10Oil type POEProduct family ZRSuction pipe (inches) 3/4"Protection class IP21Compression type: ScrollSupply voltage 220–240 VSupply voltage 265 VAdvantages and benefitsHigh reliability and efficiency thanks to the axial and radial flexibility of the scrollsLow noise and vibration levels ensure quiet operationOptimised system efficiency thanks to low superheatingFlexibility of application thanks to a wide range of ZR models for various refrigerants Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified service technician.Electronics: The electronics are included in the scope of supply.

Our oil sump heater (heating cable with clamp) is the ideal replacement for the Copeland 8561105 heating cable. With an output of 70 W and a voltage of 230 V, it is the perfect fit for Copeland compressors with a diameter of 150 to 205 mm. Technical details: Power: 70 W Voltage: 230 V Diameter: 150 to 205 mm Advantages and benefits: Our oil sump heater provides reliable heat for your Copeland compressor to ensure optimum performance. With easy installation and efficient heat transfer, it keeps your system running smoothly and protected from cold damage.

Copeland ZH45K4E-TFD-524 Scroll Compressor for Heat Pumps R134A/R407C The Copeland ZH45K4E-TFD-524 is a fixed-speed heating compressor designed for heat pump and reversible applications. It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. Copeland ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A) The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kW ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression This extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilers Axial and radial flexibility of the scrolls ensures high reliability High efficiency and increased heating capacity, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 25 × 24.6 × 43.8 cm Application range HBP Application range HT Number of phases 3 Design: Hermetic COP 3.44 dB(A) @ 1 m 64 dB(A) 75 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50–60 Hz Weight 40 Airflow 17.1 m³/h Cooling capacity (kW) 17.15 Refrigerant R134A Refrigerant R407C Capacity at operating conditions: 7.2°C evap, temp; 54.4°C cond, temp, for R407C at 50 Hz Power consumption [kW] 3.35 Max. operating current (A) 11.8 Max. operating pressure (low/high) [bar(g)] 22.6/32 Motor code TFD Pre-filled with oil Oil capacity (l) 1.9 Oil type POE Product family ZH Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Supply voltage 460V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem combinations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.