Cleaning Kit for Automotive Air Conditioning Units Errecom Total Killer Bact 2 x 100 ml, Evaporator Cleaning Foam + Inner Room Cleaning Spray, Fragrance: Talk

COMPLETE CLEANING AGENT FOR MOTOR VEHICLE CLIMATE, AIR CONDITIONING AND W&A PUMPS: TOTAL KILLER BACT (KILLER BACT FOAM + ZONE KILLER BACT)Errecom TOTAL KILLER BACT - HIGH EFFICIENCY Bacterial TOTAL KILLER BACT Scope of delivery includes: 1x 100 ml aerosol can “ Killer Bact“ cleaning foam (foam) for Split & Fan Coil air conditioners + 1x 100 ml aerosol can “ Zone Killer Bact“ f“ fü fü fü for indoor rooms (fragrance powder: strawberry, powder) The two detergents permanently remove bacteria, microorganisms, fungi, germs, pathogens and viruses, clean and refresh the air. 100 ml cans are sufficient for air conditioning systems up to 12000 BTU (3 kw) or Interior spaces up to 15 sqm; The two cleaning agents comply with the EN 1276 guideline KILLER BACT FOAM Evaporator Cleansing Foam Killer Bact should be used BEFORE the cleansing spray Zone Killer Bact should be used. bacteria and microorganisms enter the room via the ventilation system when using the air conditioning system. This can cause irritation of the eyes and throat as well as allergic reactions. Killer Bact Foam is a foamy bacterial cleaning agent for air-conditioning systems, air-conditioning systems and heat pumps that neutralizes bad and harmful equipment, no traces or contaminants. Strong foaming and thus also gets into hard-to-reach places in the system Conforms to EN 1276 directive It is recommended to use Killer Bact Foam at least twice a year (before summer and winter) Killer Bact is particularly suitable after the installation of a new air conditioner, because it removes all impurities that accumulate during the assembly process. SPECIFICATIONS: Errecom Killer Bact foamy bactericidal cleaning agent for automotive air conditioners, air conditioning and heat pumps is used in a 100 The product is available in 3 formats: 400 ml, 200 ml, 100 ml Aerosol canApplication notes: This product comes with a 60 cm tube which is inserted into the vent slot. When the agent is injected, it expands and surrounds the evaporator / ventilation duct. After an exposure time of approx. Application instructions for automotive air-conditioning systems: - Turn off the engine and the car air-conditioning system- Remove the air filter- Spray about half of the can directly onto the evaporator using the cannula. Distribute the other half in the air duct- Wait about 20 minutes for the product to take effectApplication instructions for Split air conditioning systems: - Disconnect the Split air conditioner and remove the air filter- Spray Killer Bact Foam from a distance of approx. 15-20 cm directly on the evaporator- Adjust the air conditioner and set the volume for approx. Take off the air filters from the can with the injection channel and spray the product directly into the air-conditioning circuit- Wait for the complete evaporation of the product abZONE KILLER BACT Inner Room Cleaning SprayMan should zone killer B Errecom Zone Killer Bact is a highly efficient bactericidal, germ-eliminating cleaning agent that cleans car seats, upholstery, windows, carpets and all interior crevices of small cars, family cars, SUVs, off-road vehicles, cars, motorhomes and minibuses quickly and thoroughly. The product permanently eliminates bacteria, microorganisms, fungi, germs, pathogens and viruses as well as unpleasant germs in the interior. The product is activated in the car interior and automatically cleans the air conditioning system, ventilation ducts, upholstery and carpets within 10 minutes. During the cleaning process, the detergent leaves behind a pleasant fragrance of talc, strawberries, peach, mint, lemon, orange or vanilla that gives a feeling of cleanliness and freshness and eliminates unpleasant gadgets such as cigarette smoke. Conforms to EN 1276 directive Errecom Zone Killer Bact is delivered in a 100 ml spray can The product is available in 3 formats: 100 ml, 200 ml, 400 ml spray can, application instructions for automotive air conditioning systems: 1 Switch off the engine and air conditioning system of the vehicle. 2 Switch on the air recirculation3 Place the box in the cabin on the carpet4 Press the button “ Total release", close the cabin and press the button. 15 min let5 Indications for use of air conditioning systems and heat pumps: 1 Close the windows2 Place the box in the room3 Press the button “ Total release" and press and release for approx. 15 min let4 Please find more information in the data sheet above and HERE.