Copeland ZH18KVE-TFD-526 Scroll Compressor for Heat Pumps, R407C

Copeland ZH45K4E-TFD-424 TANDEM Scroll Compressor for Heat Pumps, R134A/R407C The Copeland ZH scroll compressor is a fixed-speed heating compressor for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A). It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. ZH heating compressors are optimised for low evaporation temperatures, delivering high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiency Models with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression Key features: Axial and radial flexibility of the scrolls for high reliability High efficiency and increased heating output, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 25 × 24.6 × 43.8 cm Application range HBP HT application range Number of phases 3 Design: Hermetic COP 3.44 dB(A) @ 1 m 64 dB(A) 75 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50–60 Hz Weight 80 Air flow rate 34.2 m³/h Cooling capacity (kW) 2 × 17.15 Refrigerant R134A Refrigerant R407C Capacity under operating conditions: 7.2°C evap. temp., 54.4°C cond. temp., for R407C at 50 Hz Power consumption [kW] 3.35 Max. operating current (A) approx. 23.6 Max. operating pressure (low/high) [bar(g)] 22.6/32 Motor code TFD Pre-filled with oil Oil capacity (l) 3.8 Oil type POE Product family ZH Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Supply voltage 460V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem combinations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Copeland ZH12K1P-TFM-524 Scroll Compressor for Heat Pumps, R410A The Copeland ZH12K1P-TFM-524 is a fixed-speed heating compressor designed for heat pump and reversible applications using R410A. It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. Copeland ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A) The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kW ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression This extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilers Axial and radial flexibility of the scrolls ensures high reliability High efficiency and increased heating capacity, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical detailsDimensions (length × width × height) 24.2 × 24.2 × 42.2 cm Application range HBP Application range HT Number of phases 3 Design: Hermetic dB(A) @ 1 m 65 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50 Hz Weight 35 Airflow 8.9 m³/h Cooling capacity (kW) 13.2 Refrigerant R410A Capacity under operating conditions: 7.2°C evap, temp; 54.4°C cond, temp; R410A at 50 Hz Max. operating current (A) 10 Motor code TFM Pre-filled oil Oil quantity (l) 1.24 Oil type: POE Product family ZH Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem configurations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified technician.Electronics: The electronics are included in the scope of supply.

Our oil sump heater (heating cable with clamp) is the ideal replacement for the Copeland 8561105 heating cable. With an output of 70 W and a voltage of 230 V, it is the perfect fit for Copeland compressors with a diameter of 150 to 205 mm. Technical details: Power: 70 W Voltage: 230 V Diameter: 150 to 205 mm Advantages and benefits: Our oil sump heater provides reliable heat for your Copeland compressor to ensure optimum performance. With easy installation and efficient heat transfer, it keeps your system running smoothly and protected from cold damage.

Copeland ZH09KVE-TFD-526 Scroll Compressor for Heat Pumps, R407C The Copeland ZH09KVE-TFD-526 is a fixed-speed heating compressor designed for heat pump and reversible applications. It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. Copeland ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A) The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kW ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression This extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilers Axial and radial flexibility of the scrolls ensures high reliability High efficiency and increased heating capacity, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.3 × 24.3 × 38.6 cm Application range HBP Application range HT Number of phases 3 Design Hermetic COP 3.53 dB(A) @ 1 m 62 dB(A) 73 Pressure line (inches) 1/2" Electronics included Frequency 50–60 Hz Weight 29.9 Displacement 8 m³/h Cooling capacity (kW) 9.16 Refrigerant R407C Capacity under operating conditions: 7.2°C evap, temp; 54.4°C cond, temp; R407C at 50 Hz Power consumption [kW] 1.79 Max. operating current (A) 6.5 Max. operating pressure (low/high) [bar(g)] 22.6/32 Motor code TFD Oil pre-filled Oil capacity (l) 1.50 Oil type POE Product family ZH Suction pipe (inches) 3/4" Compression type: Scroll Supply voltage 380–420 V Supply voltage 460V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem combinations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Copeland adapter set 8030303 - Solder to Rotalock for ZR48-72/ZF13-18/ZS30-45,ZP54+67 Introduction: The Copeland adapter set 8030303 is specially designed for compressors of the ZR48-72/ZF13-18/ZS30-45,ZP54+67 series. This adapter kit enables a simple and reliable connection between solder and Rotalock to ensure smooth integration into various refrigeration, air conditioning and ventilation systems. Technical details: Manufacturer - article number: 8030303 Type: Adapter set Assignment: for ZR48-72/ZF13-18/ZS30-45,ZP54+67 Advantages and benefits: 1. Easy installation: The adapter set enables a quick and uncomplicated connection between solder and Rotalock without requiring additional tools or special knowledge. 2. 2. Versatile compatibility: Suitable for a wide range of ZR48-72/ZF13-18/ZS30-45,ZP54+67 series compressors, this adapter set offers a broad application base for different systems. 3. Reliable performance: Thanks to the high-quality workmanship and materials, the Copeland adapter set 8030303 guarantees reliable performance and a long service life, even under demanding conditions.

COPELAND thermostat, for ZH series, 8854416

Copeland ZH15K4E-TFD-524 Scroll Compressor for Heat Pumps R134A/R407CThe Copeland ZH15K4E-TFD-524 is a fixed-speed heating compressor designed for heat pump and reversible applications. It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating.Copeland ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A)The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kWZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiencyVariants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compressionThis extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilersAxial and radial flexibility of the scrolls ensures high reliabilityHigh efficiency and increased heating capacity, even at low source temperaturesHigh water temperatures for various heating systemsLow noise and vibration levelsTandem configurations possible for improved seasonal efficiencyExtended vapour injection (EVI) for maximum output and efficiencyMaximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g)Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g)Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g)Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g)Technical detailsDimensions (length × width × height) 24.3 × 24.3 × 36.4 cmApplication range: HBPApplication range HTNumber of phases 3Design HermeticCOP 3.38dB(A) @ 1 m 60dB(A) 71Pressure line (inches) 1/2"Electronics includedFrequency 50–60 HzWeight 26Displacement 5.76 m³/hCooling capacity (kW) 5.73Refrigerant R134ARefrigerant R407CCapacity under operating conditions: 7.2°C evap. temp., 54.4°C cond. temp., for R-407C at 50 HzPower consumption [kW] 1.13Max. operating current (A) 4.1Max. operating pressure (low/high) [bar(g)] 22.6/32Motor code TFDPre-filled with oilOil capacity (l) 1.30Oil type POEProduct family ZHSuction pipe (inches) 3/4"Compression type: ScrollSupply voltage 380–420 VSupply voltage 460VAdvantages and benefitsHigh efficiency and heating output, even at low source temperaturesLow noise and vibration levels for quiet operationOptimised performance through enhanced vapour injection (EVI)Tandem combinations enable improved seasonal efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Copeland ZH15K1P-TFM-524 Scroll Compressor for Heat Pumps, R410A The Copeland ZH scroll compressor is a fixed-speed heating compressor designed for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A). It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression Key features: Axial and radial flexibility of the scrolls for high reliability High efficiency and increased heating output, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.5 × 24.9 × 44.2 cm Application range HBP Application range HT Number of phases 3 Design Hermetic dB(A) @ 1 m 67 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50 Hz Weight 39 Air flow rate 11.7 m³/h Cooling capacity (kW) 17.4 Refrigerant R410A Capacity under operating conditions: 7.2°C evap, temp; 54.4°C cond, temp; R410A at 50 Hz Max. operating current (A) 13 Motor code TFM Pre-filled oil Oil quantity (l) 1.90 Oil type: POE Product family ZH Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem configurations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Copeland ZH45K4E-TFD-524 Scroll Compressor for Heat Pumps R134A/R407C The Copeland ZH45K4E-TFD-524 is a fixed-speed heating compressor designed for heat pump and reversible applications. It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. Copeland ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A) The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kW ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression This extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilers Axial and radial flexibility of the scrolls ensures high reliability High efficiency and increased heating capacity, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 25 × 24.6 × 43.8 cm Application range HBP Application range HT Number of phases 3 Design: Hermetic COP 3.44 dB(A) @ 1 m 64 dB(A) 75 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50–60 Hz Weight 40 Airflow 17.1 m³/h Cooling capacity (kW) 17.15 Refrigerant R134A Refrigerant R407C Capacity at operating conditions: 7.2°C evap, temp; 54.4°C cond, temp, for R407C at 50 Hz Power consumption [kW] 3.35 Max. operating current (A) 11.8 Max. operating pressure (low/high) [bar(g)] 22.6/32 Motor code TFD Pre-filled with oil Oil capacity (l) 1.9 Oil type POE Product family ZH Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Supply voltage 460V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem combinations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Compressor oil Emkarate RL32-3MAF (POE 1.0 l), ISO 32, viscosity Introduction: Emkarate RL32-3MAF compressor oil is a synthetic polyoester (POE) lubricant specially developed for use in compressors of refrigeration and air conditioning systems and heat pumps with HFC refrigerants. It ensures effective wear protection for steel and aluminium surfaces, which increases the service life of the entire system. With improved efficiency features, it is suitable for both the initial filling and the service refilling process of the compressor.Technical details: Density at 20 °C: 0.981 g/ml Flash point (according to Clev.): 240 °C Kin. Viscosity at 40 °C: 31.2 mm2/s Kin. Viscosity at 100 °C: 5.6 mm2/s Viscosity index (VI): 125 Pour point: -40 °C Type: synthetic refrigeration oil Type designation: RL323MAF1L Viscosity (max.): 32 cSt Advantages and benefits: The Emkarate RL32-3MAF provides an effective wear protection solution for bearing surfaces, extending system life and increasing efficiency. With its excellent low temperature properties and high chemical and thermal stability, this product is suitable for a wide operating temperature range. The ester oil optimises the performance of Copeland compressors and provides reliable lubrication, contributing to system efficiency and longevity. Info: Öl: Compressor is pre-filled with Öl at the factory. Refrigerant is not included and must be filled by a specialised company. Electronics: The electronics are included in the scope of delivery.

Copeland ZR61KCE-TFD-522 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407C The Copeland ZR scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chillers, rooftop air-handling units and precision air-handling units. Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a Typical applications include chillers, rooftop air-handling units and precision air-handling units By using multiple Copeland-certified tandem and trio combinations, higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can also be achieved with high seasonal efficiency Special ZR models for R513A (GWP 631) are available to meet current requirements for low GWP values The series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reduction Axial and radial flexibility of the scrolls ensures high reliability and efficiency Extensive ZR range for R407C, R134a and R513A Low TEWI (Total Equivalent Warming Impact) Low noise and vibration levels Low oil carryover Copeland-certified tandem and trio configurations for high seasonal efficiency Maximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g) Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.6 × 24.6 × 45.1 cm Application range AC Application range HBP MBP application range Number of phases 3 Design: Hermetic dB(A) @ 1 m 60 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50–60 Hz Weight 39 Air delivery 14.3 m³/h Cooling capacity (kW) 12.45 Refrigerant R134A Refrigerant R22 Refrigerant R407C Capacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 Hz Max. operating current (A) 11 Motor code TFD Oil pre-filled Oil quantity (l) 1.66 Oil type: POE Product family ZR Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Supply voltage 460V Advantages and benefits High reliability and efficiency thanks to the axial and radial flexibility of the scrolls Low noise and vibration levels ensure quiet operation Optimal system adaptation thanks to low overheating and special ZR models for low GWP values High seasonal efficiency thanks to Copeland-certified tandem and trio configurations Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified service engineer.Electronics: The electronics are included in the scope of supply.