Copeland ZH45K4E-TFD-524 Scroll Compressor for Heat Pumps R134A/R407C

Copeland ZB45KCE-TFD-551 Scroll Compressor for Refrigeration R404A/R448A/R449AThe Copeland ZB45KCE-TFD-551 scroll compressor is designed for medium-temperature refrigeration applications and offers a reliable solution for various refrigerants. It features a compact and lightweight design, making it ideal for refrigeration units and compact refrigeration systems.Copeland ZB and ZBD scroll compressors are designed for medium-temperature refrigeration applications using the refrigerants R407A/F/C, R448A/R449A, R404A, R134a, R450A and R513AThe ZB series covers a displacement range of approximately 5.9 to 87.5 m³/hThe digital ZBD models allow for stepless capacity modulation, typically from 10 to 100 %Copeland scroll compressors have significantly fewer moving parts than reciprocating compressors and feature a set of spirals that are axially and radially flexible, making them particularly robust against operational disturbances (e.g. liquid slugging)Thanks to their compact, lightweight design, they are ideally suited for chillers, compact refrigeration systems and process coolingThe Summit models (approx. 7–15 HP) are designed for high seasonal efficiency and achieve up to around 15 % higher efficiency than comparable semi-hermetic piston compressorsIf required, an optional soundproofing hood can reduce the noise level by up to approximately 10 dB(A)Axial and radial flexibility of the scrolls ensures high reliability and efficiencyWide operating range with low condensing temperatures and rapid cooling capacitiesHigh seasonal efficiency, optimised for typical operating pointsLightweight and compact design, weighing up to about half as much as comparable semi-hermetic piston compressorsOptional soundproofing hood for additional noise reductionDigital ZBD models for stepless capacity modulation (approx. 10–100 %)one compressor type for multiple refrigerants (R407A/F/C, R448A/R449A, R404A, R134a, R450A, R513A)Maximum permissible operating pressure (PS): ZB15 to ZB45: low-pressure side 21 bar(g) / high-pressure side 32 bar(g); ZB50 to ZB114: Low-pressure side 22.6 bar(g) / High-pressure side 32 bar(g); Digital ZBD: Low-pressure side 21 bar(g) / High-pressure side 28.8 bar(g); Summit ZBD: Low-pressure side 22.6 bar(g) / High-pressure side 32 bar(g)Technical detailsMBP application rangeNumber of phases: 3Design: HermeticCOP 2.09dB(A) @ 1 m 61dB(A) 79Discharge pipe (inches) 1"Electronics includedRecommended crankcase heater 70Frequency 50–60 HzWeight 39Airflow 17.1 m³/hCooling capacity (kW) 105Refrigerant R134ARefrigerant R22Refrigerant R404ARefrigerant R407ARefrigerant R407CRefrigerant R407FRefrigerant R448ARefrigerant R449ARefrigerant R450ARefrigerant R513ACapacity under operating conditions: -10°C evap, temp; 45°C cond, temp; 20 °C suction gas return; 0 K subcooling for R-448A at 60 HzPower consumption [kW] 4.81Max. operating current (A) 13.1Max. operating pressure ND/HD [bar(g)] 21/32Motor code TFDOil pre-filledOil capacity (l) 1.90Oil type POEProduct family ZBSuction pipe (inches) 1 1/4"Protection class IP21Compression type: ScrollSupply voltage 380–420 VSupply voltage 460 VAdvantages and benefitsHigh reliability and efficiency thanks to the axial and radial flexibility of the scrollsOptimal performance at low condensing temperatures and with high cooling capacitiesLow weight and compact design allow for easy integration into various applicationsOptional soundproofing hood reduces noise levels for quieter operation Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified service technician.Electronics: The electronics are included in the scope of supply.

Copeland ZH38K4E-TFD-524 Scroll Compressor for Heat Pumps R134A/R407CThe Copeland ZH38K4E-TFD-524 is a fixed-speed heating compressor designed for heat pump and reversible applications. It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating.Copeland ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A)The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kWZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiencyVariants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compressionThis extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilersAxial and radial flexibility of the scrolls ensures high reliabilityHigh efficiency and increased heating capacity, even at low source temperaturesHigh water temperatures for various heating systemsLow noise and vibration levelsTandem configurations possible for improved seasonal efficiencyExtended vapour injection (EVI) for maximum output and efficiencyMaximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g)Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g)Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g)Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g)Technical detailsDimensions (length × width × height) 24.7 × 24.1 × 43.8 cmApplication range HBPApplication range HTNumber of phases 3Design: HermeticCOP 3.54dB(A) @ 1 m 63dB(A) 74Pressure line (inches) 1/2"Electronics includedRecommended crankcase heater 70Frequency 50–60 HzWeight 38Airflow 14.4 m³/hCooling capacity (kW) 14.55Refrigerant R134ARefrigerant R407CCapacity under operating conditions: 7.2°C evap. temp., 54.4°C cond. temp., for R407C at 50 HzPower consumption [kW] 2.84Max. operating current (A) 10.1Max. operating pressure (low/high) [bar(g)] 22.6/32Motor code TFDOil pre-filledOil capacity (l) 1.90Oil type POEProduct family ZHSuction line (inches) 7/8"Compression type: ScrollSupply voltage 380–420 VSupply voltage 460VAdvantages and benefitsHigh efficiency and heating output, even at low source temperaturesLow noise and vibration levels for quiet operationOptimised performance through enhanced vapour injection (EVI)Tandem combinations enable improved seasonal efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Copeland ZR61KCE-TFD-522 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407C The Copeland ZR scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chillers, rooftop air-handling units and precision air-handling units. Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a Typical applications include chillers, rooftop air-handling units and precision air-handling units By using multiple Copeland-certified tandem and trio combinations, higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can also be achieved with high seasonal efficiency Special ZR models for R513A (GWP 631) are available to meet current requirements for low GWP values The series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reduction Axial and radial flexibility of the scrolls ensures high reliability and efficiency Extensive ZR range for R407C, R134a and R513A Low TEWI (Total Equivalent Warming Impact) Low noise and vibration levels Low oil carryover Copeland-certified tandem and trio configurations for high seasonal efficiency Maximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g) Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.6 × 24.6 × 45.1 cm Application range AC Application range HBP MBP application range Number of phases 3 Design: Hermetic dB(A) @ 1 m 60 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50–60 Hz Weight 39 Air delivery 14.3 m³/h Cooling capacity (kW) 12.45 Refrigerant R134A Refrigerant R22 Refrigerant R407C Capacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 Hz Max. operating current (A) 11 Motor code TFD Oil pre-filled Oil quantity (l) 1.66 Oil type: POE Product family ZR Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Supply voltage 460V Advantages and benefits High reliability and efficiency thanks to the axial and radial flexibility of the scrolls Low noise and vibration levels ensure quiet operation Optimal system adaptation thanks to low overheating and special ZR models for low GWP values High seasonal efficiency thanks to Copeland-certified tandem and trio configurations Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified service engineer.Electronics: The electronics are included in the scope of supply.

Copeland ZH26K4E-TFD-524 Scroll Compressor for Heat Pumps R134A/R407CThe Copeland ZH scroll compressor is a fixed-speed heating compressor designed for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A). It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating.ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiencyVariants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compressionKey features:Axial and radial flexibility of the scrolls for high reliabilityHigh efficiency and increased heating output, even at low source temperaturesHigh water temperatures for various heating systemsLow noise and vibration levelsTandem configurations possible for improved seasonal efficiencyExtended vapour injection (EVI) for maximum output and efficiencyMaximum permissible operating pressure (PS):ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g)ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g)ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g)ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g)Technical detailsDimensions (length × width × height) 24.3 × 24.2 × 40 cmApplication range HBPApplication range HTNumber of phases 3Design HermeticCOP 3.53dB(A) @ 1 m 63dB(A) 75Pressure line (inches) 1/2"Electronics includedRecommended crankcase heater 70Frequency 50–60 HzWeight 28Air flow rate 10 m³/hCooling capacity (kW) 9.99Refrigerant R134ARefrigerant R407CCapacity at operating conditions: 7.2°C evap, temp; 54.4°C cond, temp, for R407C at 50 HzPower consumption [kW] 1.96Max. operating current (A) 7Max. operating pressure ND/HD [bar(g)] 22.6/32Motor code TFDPre-filled with oilOil capacity (l) 3.10Oil type POEProduct family ZHSuction pipe (inches) 3/4"Compression type: ScrollSupply voltage 380–420 VSupply voltage 460VAdvantages and benefitsHigh efficiency and heating output, even at low source temperaturesLow noise and vibration levels for quiet operationOptimised performance through enhanced vapour injection (EVI)Tandem combinations enable improved seasonal efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Copeland ZR72KCE-TFD-522 scroll compressor for air-conditioning and refrigeration systems ``` The Copeland ZR72KCE-TFD-522 is a hermetic scroll compressor for air-conditioning, heat pump and refrigeration applications. With a cooling capacity of approx. 14.75 kW and a displacement of 17.1 m³/h, this three-phase compressor is suitable for comfort air conditioning, process cooling and precision cooling. Typical applications include chillers, rooftop air-handling units, central air-conditioning systems and precision air-conditioning units. The tried-and-tested Copeland scroll technology enables reliable, low-vibration and efficient operation, combined with a compact design. Advantages of the Copeland ZR72KCE-TFD-522 High reliability: Axial and radial flexibility of the scroll coils ensures safe operation. Efficient scroll technology: Low mechanical losses and few moving parts. Quiet system operation: Low noise and vibration levels with a sound pressure level of approx. 61 dB(A) at a distance of 1 m. Low oil carry-over: Ensures a stable refrigeration cycle and reliable lubrication. Wide range of applications: Suitable for AC, HBP and MBP applications. Factory-filled with oil: The compressor is supplied with 1.77 litres of POE oil. Electronics included: The electronics specified for this version are included in the scope of delivery. Typical areas of application Chillers and liquid coolers Roof-mounted air conditioning units and central air-conditioning systems Precision air-handling units and server room cooling Comfort and process cooling Commercial refrigeration systems Air conditioning and heat pump applications The tried-and-tested Copeland ZR series The Copeland ZR series has been developed for comfort, process and precision cooling and covers a wide range of capacities. The compressors are characterised by a compact design, low vibration levels and high seasonal efficiency. For higher capacity requirements, Copeland offers approved tandem and trio configurations. This allows several compressors to be combined and the cooling capacity to be tailored to the actual system requirements. The specific combination must be checked against the current Copeland approvals prior to design. Refrigerants and operating conditions For the ZR72KCE-TFD-522, the product data provided specifies the refrigerants R134a, R407C and R22. The Copeland ZR product family also includes special models for R513A. However, an R513A approval for the version offered here must not be automatically inferred from this. The specified cooling capacity of 14.75 kW refers to an operating point with R407C at 50 Hz, an evaporation temperature of +5 °C, a condensing temperature of +50 °C, 10 K suction gas superheat and 0 K subcooling. The actual capacity depends on the refrigerant and the respective operating conditions of the system. Installation notes The scroll compressor is supplied from the factory with 1.77 litres of POE oil . Refrigerant is not included. Installation, pressure testing, evacuation, electrical commissioning and refrigerant charging must only be carried out by a suitably qualified specialist contractor. A crankshaft housing heater with a power rating of 70 W is recommended. The crankshaft housing heater is only included in the scope of delivery if it is expressly listed as a component of the delivery. Technical data Manufacturer Copeland Model ZR72KCE-TFD-522 Product family ZR Compression type Scroll Design Hermetic Areas of application AC, HBP and MBP Refrigerants as per product data R134a, R407C and R22 Cooling capacity 14.75 kW Airflow rate 17.1 m³/h Operating conditions R407C at 50 Hz, +5 °C evaporation, +50 °C condensation, 10 K suction gas superheat and 0 K subcooling Motor code TFD Phases 3 Supply voltage 380–420 V / 50 Hz and 460 V / 60 Hz Frequency 50–60 Hz Max. operating current 13 A Max. operating pressure (low/high pressure) 21 / 29 bar(g) Suction pipe 7/8 inch Discharge pipe 1/2 inch Oil type POE Oil capacity 1.77 l Oil fill Pre-filled at the factory Recommended sump heater 70 W Sound pressure level at 1 m 61 dB(A) Dimensions L × W × H 24.2 × 24.2 × 43.8 cm Weight 38.6 kg Electronics Included in the scope of delivery Refrigerant charge Not included Important note Before placing your order, please check the full model designation, the motor code, the operating voltage, the pipe connections and the intended operating point against the existing compressor and the system documentation. ```

Copeland ZH15K1P-TFM-524 Scroll Compressor for Heat Pumps, R410A The Copeland ZH scroll compressor is a fixed-speed heating compressor designed for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A). It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression Key features: Axial and radial flexibility of the scrolls for high reliability High efficiency and increased heating output, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.5 × 24.9 × 44.2 cm Application range HBP Application range HT Number of phases 3 Design Hermetic dB(A) @ 1 m 67 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50 Hz Weight 39 Air flow rate 11.7 m³/h Cooling capacity (kW) 17.4 Refrigerant R410A Capacity under operating conditions: 7.2°C evap, temp; 54.4°C cond, temp; R410A at 50 Hz Max. operating current (A) 13 Motor code TFM Pre-filled oil Oil quantity (l) 1.90 Oil type: POE Product family ZH Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem configurations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Copeland ZH12K1P-TFM-524 Scroll Compressor for Heat Pumps, R410A The Copeland ZH12K1P-TFM-524 is a fixed-speed heating compressor designed for heat pump and reversible applications using R410A. It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. Copeland ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A) The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kW ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression This extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilers Axial and radial flexibility of the scrolls ensures high reliability High efficiency and increased heating capacity, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical detailsDimensions (length × width × height) 24.2 × 24.2 × 42.2 cm Application range HBP Application range HT Number of phases 3 Design: Hermetic dB(A) @ 1 m 65 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50 Hz Weight 35 Airflow 8.9 m³/h Cooling capacity (kW) 13.2 Refrigerant R410A Capacity under operating conditions: 7.2°C evap, temp; 54.4°C cond, temp; R410A at 50 Hz Max. operating current (A) 10 Motor code TFM Pre-filled oil Oil quantity (l) 1.24 Oil type: POE Product family ZH Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem configurations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified technician.Electronics: The electronics are included in the scope of supply.

Copeland ZH45K4E-TFD-424 TANDEM Scroll Compressor for Heat Pumps, R134A/R407C The Copeland ZH scroll compressor is a fixed-speed heating compressor for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A). It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. ZH heating compressors are optimised for low evaporation temperatures, delivering high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiency Models with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression Key features: Axial and radial flexibility of the scrolls for high reliability High efficiency and increased heating output, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 25 × 24.6 × 43.8 cm Application range HBP HT application range Number of phases 3 Design: Hermetic COP 3.44 dB(A) @ 1 m 64 dB(A) 75 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50–60 Hz Weight 80 Air flow rate 34.2 m³/h Cooling capacity (kW) 2 × 17.15 Refrigerant R134A Refrigerant R407C Capacity under operating conditions: 7.2°C evap. temp., 54.4°C cond. temp., for R407C at 50 Hz Power consumption [kW] 3.35 Max. operating current (A) approx. 23.6 Max. operating pressure (low/high) [bar(g)] 22.6/32 Motor code TFD Pre-filled with oil Oil capacity (l) 3.8 Oil type POE Product family ZH Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Supply voltage 460V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem combinations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Compressor Scroll DAIKIN JT170GBB-Y1L This high-quality DAIKIN brand compressor, model JT170GBB-Y1L, is the ideal product for refrigeration, air conditioning and ventilation technology as well as for heat pumps. With a cooling capacity of 17.89 kW and a generous displacement of 64 cm3, this compressor is ideal for demanding applications in various sectors. Thanks to its powerful features and reliability, it is the perfect solution for professional refrigeration and air conditioning systems.Technical details: Power: 61050 BTU Refrigerant: R407C Voltage (50Hz): 380-420V/3 Voltage (60Hz): 380-440V/3 Power: 5 HP Connections: 22.1 x 16 Ø mm Current intensity: 8.5 A Energy efficiency ratio (COP): 3.4 w/w Weight: 33.1 kg Advantages and benefits: Thanks to its high COP value of 3.4 w/w, this compressor is characterised by its excellent energy efficiency, which leads to savings in operating costs. Its robust design and high performance make it a reliable option for professional applications. In addition, its easy handling and compact dimensions make it easy to install and maintain.

Copeland ZH21K4E-TFD-524 Scroll Compressor for Heat Pumps R134A/R407C The Copeland ZH21K4E-TFD-524 is a fixed-speed heating compressor designed for heat pump and reversible applications. It offers high heating capacity and efficiency, thereby reducing the need for additional electric or gas-fired heating. ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A) The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kW ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression This extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilers Axial and radial flexibility of the scrolls ensures high reliability High efficiency and increased heating capacity, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.3 × 24.2 × 38.7 cm Application range HBP Application range HT Number of phases 3 Design Hermetic COP 3.47 dB(A) @ 1 m 59 dB(A) 72 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50–60 Hz Weight 27 Airflow 8 m³/h Cooling capacity (kW) 83 Refrigerant R134A Refrigerant R407C Capacity under operating conditions: 7.2°C evap. temp., 54.4°C cond. temp., for R-407C at 50 Hz Power consumption [kW] 1.56 Max. operating current (A) 5.6 Max. operating pressure (low/high) [bar(g)] 22.6/32 Motor code TFD Pre-filled with oil Oil capacity (l) 1.50 Oil type POE Product family ZH Suction pipe (inches) 3/4" Compression type: Scroll Supply voltage 380–420 V Supply voltage 460V Advantages and benefits High efficiency and heating output even at low source temperatures Low noise and vibration levels for quiet operation Tandem combinations enable improved seasonal efficiency Extended vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified technician.Electronics: The electronics are included in the scope of supply.

Copeland ZR40K3E-TFD-522 scroll compressor for air-conditioning and refrigeration applications ``` The Copeland ZR40K3E-TFD-522 is a hermetic scroll compressor for air-conditioning, heat pump and refrigeration systems. With a cooling capacity of approx. 8.22 kW, this three-phase compressor is particularly suitable for comfort air conditioning, process cooling, chillers, rooftop air conditioning units and precision air conditioning systems. The tried-and-tested scroll technology uses few moving parts and thereby enables quiet, low-vibration and efficient operation. The axial and radial flexibility of the scroll coils ensures a high level of operational reliability and protects the compressor in the event of brief liquid or contaminant ingress. Advantages of the Copeland ZR40K3E-TFD-522 High efficiency: COP of 3.03 under the specified operating conditions Quiet operation: low noise and vibration levels Reliable scroll technology: axial and radial flexibility of the scroll coils Low oil carry-over: supports stable and efficient system operation Wide range of applications: suitable for AC, HBP and MBP applications Flexible power supply: for 380–420 V at 50 Hz and 460 V at 60 Hz Factory-filled: POE oil is already contained within the compressor Electronics included: the required electronics are supplied as standard Typical applications The Copeland Scroll compressor can be used in the following systems, amongst others: Chillers and liquid coolers Roof-mounted air-handling units and central air-conditioning systems Precision air-handling units and server room cooling Process and commercial refrigeration Air conditioning and heat pump applications Single-compressor units and approved tandem and trio configurations The tried-and-tested Copeland ZR series The Copeland ZR series covers a wide range of capacities for air conditioning, process and precision cooling. For higher capacity requirements, Copeland certified tandem and trio combinations are available. This enables the creation of systems with high seasonal efficiency and demand-based capacity control. Depending on the specific model and application, the series is available for various refrigerants such as R407C, R134a and R513A. For the ZR40K3E-TFD-522, the technical product data provided here lists R134a, R407C and R22. The specific refrigerant approval must be verified prior to use, referring to the latest Copeland documentation and the intended operating conditions. Installation notes The compressor is supplied from the factory with 1.10 litres of POE oil. Refrigerant is not included. Installation, pressure testing, evacuation and refrigerant charging must only be carried out by a suitably qualified specialist contractor. A crankshaft housing heater with a power rating of 70 W is recommended. A crankshaft housing heater is only included in the scope of supply if it is expressly listed in the scope of supply of the quotation. Technical data Manufacturer Copeland Model ZR40K3E-TFD-522 Product family ZR Compression type Scroll Design Hermetic Areas of application AC, HBP and MBP Refrigerant according to data sheet R134a, R407C and R22 Cooling capacity 8.22 kW Power consumption 2.71 kW COP 3.03 Displacement 9.43 m³/h Operating conditions +5 °C evaporation, +50 °C condensation, 10 K suction gas superheat and 0 K subcooling, R407C at 50 Hz Motor code TFD Phases 3 Supply voltage 380–420 V / 50 Hz and 460 V / 60 Hz Frequency 50–60 Hz Max. operating current 7 A Max. operating pressure (low/high pressure) 20 / 29.5 bar(g) Suction pipe 3/4 inch Discharge pipe 1/2 inch Oil type POE Oil capacity 1.10 l Oil fill Pre-filled at the factory Recommended sump heater 70 W Sound pressure level at 1 m 57 dB(A) Sound power level 71 dB(A) Protection class IP21 Dimensions L × W × H 24.2 × 24.2 × 40 cm Weight 27 kg Electronics Included in the scope of delivery Refrigerant charge Not included Important note Before placing your order, please check the full model designation, the motor code, the connections, the voltage and the intended operating point against the existing compressor or the system documentation. ```