Copeland ZH33KVE-TFD-526 Scroll Compressor for Heat Pumps, R407C

Copeland ZH45K4E-TFD-524 Scroll Compressor for Heat Pumps R134A/R407C The Copeland ZH45K4E-TFD-524 is a fixed-speed heating compressor designed for heat pump and reversible applications. It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. Copeland ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A) The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kW ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression This extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilers Axial and radial flexibility of the scrolls ensures high reliability High efficiency and increased heating capacity, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 25 × 24.6 × 43.8 cm Application range HBP Application range HT Number of phases 3 Design: Hermetic COP 3.44 dB(A) @ 1 m 64 dB(A) 75 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50–60 Hz Weight 40 Airflow 17.1 m³/h Cooling capacity (kW) 17.15 Refrigerant R134A Refrigerant R407C Capacity at operating conditions: 7.2°C evap, temp; 54.4°C cond, temp, for R407C at 50 Hz Power consumption [kW] 3.35 Max. operating current (A) 11.8 Max. operating pressure (low/high) [bar(g)] 22.6/32 Motor code TFD Pre-filled with oil Oil capacity (l) 1.9 Oil type POE Product family ZH Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Supply voltage 460V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem combinations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Copeland ZH26K4E-TFD-524 Scroll Compressor for Heat Pumps R134A/R407CThe Copeland ZH scroll compressor is a fixed-speed heating compressor designed for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A). It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating.ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiencyVariants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compressionKey features:Axial and radial flexibility of the scrolls for high reliabilityHigh efficiency and increased heating output, even at low source temperaturesHigh water temperatures for various heating systemsLow noise and vibration levelsTandem configurations possible for improved seasonal efficiencyExtended vapour injection (EVI) for maximum output and efficiencyMaximum permissible operating pressure (PS):ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g)ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g)ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g)ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g)Technical detailsDimensions (length × width × height) 24.3 × 24.2 × 40 cmApplication range HBPApplication range HTNumber of phases 3Design HermeticCOP 3.53dB(A) @ 1 m 63dB(A) 75Pressure line (inches) 1/2"Electronics includedRecommended crankcase heater 70Frequency 50–60 HzWeight 28Air flow rate 10 m³/hCooling capacity (kW) 9.99Refrigerant R134ARefrigerant R407CCapacity at operating conditions: 7.2°C evap, temp; 54.4°C cond, temp, for R407C at 50 HzPower consumption [kW] 1.96Max. operating current (A) 7Max. operating pressure ND/HD [bar(g)] 22.6/32Motor code TFDPre-filled with oilOil capacity (l) 3.10Oil type POEProduct family ZHSuction pipe (inches) 3/4"Compression type: ScrollSupply voltage 380–420 VSupply voltage 460VAdvantages and benefitsHigh efficiency and heating output, even at low source temperaturesLow noise and vibration levels for quiet operationOptimised performance through enhanced vapour injection (EVI)Tandem combinations enable improved seasonal efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Copeland ZH30K4E-TFD-524 Scroll Compressor for Heat Pumps R134A/R407C The Copeland ZH30K4E-TFD-524 is a fixed-speed heating compressor designed for heat pump and reversible applications. It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. Copeland ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A) The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kW ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression This extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilers Axial and radial flexibility of the scrolls ensures high reliability High efficiency and increased heating capacity, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.7 × 24.1 × 43.8 cm Application range HBP Application range HT Number of phases 3 Design: Hermetic COP 3.47 dB(A) @ 1 m 62 dB(A) 73 Pressure line (inches) 1/2" Electronics included Frequency 50–60 Hz Weight 42 Displacement 11.7 m³/h Cooling capacity (kW) 11.7 Refrigerant R134A Refrigerant R407C Capacity under operating conditions: 7.2°C evap. temp., 54.4°C cond. temp., for R407C at 50 Hz Power consumption [kW] 2.28 Max. operating current (A) 8.23 Max. operating pressure (low/high) [bar(g)] 22.6/32 Motor code TFD Oil pre-filled Oil capacity (l) 1.90 Oil type POE Product family ZH Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Supply voltage 460V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem combinations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Oil sump heater 70 W for Copeland compressors The oil sump heater with heating cable and clamp is a replacement for the Copeland 8561058 heating cable. With an output of 70 W and a voltage of 230 V, it is ideal for use in various Copeland scroll compressors. The heating cable has a length of 54.5 cm and the total length is 160 cm. The diameter varies between 255 mm and 300 mm. Compatible Copeland compressors Compressor 47-32ZB56: 70 W, 283 mm Compressor 47-32ZB92: 70 W, 283 mm Compressor 47-32ZF24: 70 W, 283 mm And other models... Sales-promoting content The oil sump heater is the ideal solution for reliable and efficient heating of the oil sump in Copeland compressors. With an output of 70 W, it ensures a constant temperature and prevents the oil from freezing. This extends the service life of the compressor and minimises downtime. Thanks to its simple installation and high-quality workmanship, the oil sump heater is a cost-effective and reliable solution for operating refrigeration and air conditioning systems with Copeland compressors.