Refrigeration controller PEGO ECP200 Expert, 230 V, 16A Max, IP 65

Cooling point controller PEGO ECP200 Expert, 230 V, 16A Max, IP 65 is an electronic, microprocessor-controlled cooling system controller for refrigeration cells with monophase compressors up to 2HP. Possible applications: 1) Monophase compressor up to 2HP) with integrated recording device that successfully controls the room temperature, evaporator fan and defrost heater. The room temperature, evaporator temperature, switching states of the individual outputs, current time and month are shown on the illuminated LCD display. The refrigeration controller has NTC sensors and 5 independent relay outputs (for compressor, evaporator fan, defrost heater, alarm output, refrigeration room light). In addition, the PEGO ECP200 Expert refrigeration controller has 3 potential-free input contacts (door contact switch, alarm switch, compressor protection), which can be configured accordingly. The cooling system control is programmed using the 6 buttons on the front. Equipment: Control board with display and keypad for operating elements incl. recording device, power board, NTC sensor 10K 1%, various cable glands for cable entry

Technical data for PEGO ECP200 Expert:
- Voltage: 230 VAC 50/60 Hz
- Operating temperature: -5 to +50°C
- Storage temperature: -30 to +70°C
- Type of connectable sensors: NTC 10K
- Sensor length: 3 m
- Resolution: 0.1 °C
- Sensor reading accuracy: 0.5 °C
- Reading range: -45 to +45 °C
- Output characteristics:
- Compressor: 1500 W (2HP)
- Heating resistors: 3000 W (AC1)
- Fans: 500 W (AC3)
- Cell lighting: 800 W (AC1)
- Adjustable alarm contact: present
- Testing: TELENET/MODBUS-RTU
- Protection class: IP 65
- Dimensions: 262 x 168 x 97 mm

An additional load circuit can be used to control 400V units.