Errecom EXTREME 2 x 30 ml, sealant for air conditioning systems incl. flex adapter for R134a and R1234yf systems

Errecom EXTREME sealant is an indispensable product that helps to seal all leaks in rubber or metal parts of air conditioning and refrigeration systems. Errecom EXTREME seals leaks no larger than 0.5mm in the long term, does not react with oxygen or moisture, is compatible with all refrigerants including CFC, HFC and HCFC, is visible with all U/V lamps, reduces compressor noise, contains no polymers, does not damage the compressor, does not clog the refrigeration system components.

SPECIFICATIONS: Errecom EXTREME seals permanently and is ideal for preventive maintenance to prevent major damage to the vehicle (A/C) and air conditioning systems. The Errecom Extreme Packed in Push&Fill System is supplied in a 30 ml can including container and spare container.

Article is not packed in a blister.

Features:
Permanently seals refrigerant leaks on metal and rubber parts of the system.
Compatible with all refrigerants including CFC, HFC and HCFC.
Visible with all U/V lamps.
Reduces compressor friction, vibration and noise.
Ideal for preventive use.
Polymer-free.
Does not react with oxygen or moisture.
Does not clog the compressor or service station.
Safe for air conditioning components.
Does not damage service station components.
DILUTION IN LUBRICANT = 1:16
UNIVERSAL DOSAGE FOR VEHICLE AIR CONDITIONING SYSTEMS = 30 ML (1 FL. OZ.)
DOSAGE FOR A/C AND AIR CONDITIONING SYSTEMS:

BIS	KW	BTU/H	TONS	ÖL	EXTREME
	6	24,000	2	0.2 L	12 ml
	15	48,000	4	0.5 L	30 ml
	21	72,000	6	0.7 L	42 ml
	30	96. 000	8	1 L	60 ml
	45	144,000	12	1.5 L	90 ml
	60	192,000	16	2 L	120 ml
	75	240,000	20	2.5 L	150 ml

- 12 ml Extreme für cycle up to 0.4 kg refrigerant
- 24 ml Extreme für cycle up to 0.45 kg refrigerant
- 30 ml Extreme für cycle up to 1 kg.
- 42 ml Extreme für circulation up to 1.5 kg refrigerant
- 60 ml Extreme für circulation up to 3 kg refrigerant

INSTRUCTIONS:
1. switch on the air conditioning or refrigeration system and set to max. refrigeration.
2. unscrew the protective cap of the "EXTREME" AIR CONDITIONER and connect the adapter.
3. if you are using a flexible adapter, you must squeeze the air out of the transparent hose.
4. Connect the adapter to the low-pressure side outlet of the air conditioning system and fill the "EXTREME" SEALANT.
5. For car air conditioning systems without a low-pressure side outlet, it is necessary to use special adapters (available accessories).
6. When applying the "EXTREME" SEALANT in the aerosol container, press and release the container 6-8 times and then keep it pressed for at least 1 minute.
7. Remove the adapter from the system.
8. Leave the system to work in this condition for about 30 minutes.

the product in aerosol containers can be used with cooling and air conditioning systems that are under the vacuum or have a maximum working pressure of 11 bar (160 psi)

For more information, see the data sheet above and HERE.

You can find a safety data sheet HERE.