Errecom Extreme 30 ml, sealant for automotive air conditioning systems incl. adapter for R134a

Errecom Extreme 30 ml, sealant for automotive air conditioning systems incl. Adapter for R134aErrecom EXTREME Sealant is an indispensable product that helps to seal all leaks in rubber or metal parts of air conditioning and refrigeration systems. Errecom EXTREME does not seal leaks larger than 0.5mm long term, it does not react with oxygen or moisture, is compatible with all refrigerants including CFC, HFC and HCFC, is visible with all U/V lamps, reduces heat in the compressor, does not contain any polymers, does not damage to the compressor, does not react with water, does not react with water, does not react with water, does not contain any chemicals, does not damage to the compressor. The Errecom Extreme packaged in the Push& Fill system is delivered in a 30 ml can, including a container and spare parts box, and is permanently sealed against the leaks of refrigerants in metal and rubber parts of the system. compatible with all refrigerants including CFC, HFC and HCFC. visible with all refrigerants including CFC, HFC and HCFC. 00020,2 L12 ml1548 00040.5 L30 ml2172 00060,7 L42 ml3096 00081 L60 ml45144 000121,5 L90 ml60192 000162 L120 ml75240 000202,5 L150 ml INSTRUCTIONS: 1 Switch on the air conditioning or cooling system and set it to max. Cooling. 2 Unscrew the protective cap of the “ EXTREME“ SEALANT and lock the adapter. 3 When using a flexible adapter, the air must be squeezed out of the transparent tube. 4 Connect the adapter to the low side outlet of the air conditioner and fill the "EXTREME" SEALANT. 5 For automotive air-conditioning systems without low-pressure side exit it is necessary to use special adapters (available accessories). 6 If you use the EXTREME SEALANT in the aerosol container, you have to press and release the container 6-8 times and then keep it pressed for at least 1 minute. 7 Remove the adapter from the system. 8 Leave the system for approx. THE PRODUCT IN AEROSOL-BEHÄ LTER CAN BE USED WITH LTE AND AIR CONDITIONING INSTALLATIONS WHICH ARE UNDER THE VACUUM OR THE MAXIMUM WORKING PRESSURE OF 11 BAR (160 psi)Further information can be found in the data sheet above and HERE.