€503.73*
Do you have some questions about this product?
- Your personal contact person
- Elif Goekce
- [email protected]
- +49 2554 912 983 9
- Nicht das gefunden wonach Sie suchen?
Two-stage vacuum pump with dual voltage models of Mastercool 90063-2V-220.
Features:
• reflux for use. Air passage prevents the oil is pulled in the system.
• An oil mist filter in the exhaust air removes the oil mist.
• Designed for low temperature and voltage conditions. In winter, normal starting is ensured; =41°F (=5°C) and ± 10% voltage value.
• The pump operates at a very high TERMINATION vacuum and low tone.
This vacuum pump has already been tested in the factory and shipped with only a small amount of oil. OIL BEFORE YOU PUMP refilled! for use specific fine refinery oil for vacuum pumps. Omission of oil refilling damage the oil cartridge, and this will void the warranty!
Technical Specifications:
Air volume: 85 lit / min / 71 lit / min
Ultimate: 15 microns
Motor: 1/4 HP
Speed: 2880RPM
Supply Voltage: 110V / 220V / 50 / 60HZ
Power Cord: 220V cable (Shuko)
Weight: 10.7 kg
Oil filling:
1. Make sure that the oil drain plug under the front cover before the oil top-up is tight.
2. Pull out the oil filling plug from the upper part of the pump and place the vial of oil in the filling station.
3. Slowly top up the oil level is at the oil level line. Do not overfill!
4. The great brass replace oil fill plug.
Dimensions: | 350 x 143 x 265 |
---|---|
Final vacuum: | 0.02 mbar |
Kältemittelklasse: | A1 |
Manufacturer: | Mastercool |
Pump volume: | 85, 85 L/Min |
Voltage: | 220V |
number of steps: | number of steps |