Coaxial evaporator Schmöge VS14-35E CuNi10Fe1Mn, 40.9 kW, 5.0 m3/h

Coaxial evaporator (coaxial heat exchanger) Schmö le VS14-35E CuNi10Fe1Mn, 40.9 kW, 5.0 m3/h Scope of application: Coaxial condensers from Schmö le are used in heat pumps, refrigeration and air-conditioning systems, heat recovery systems, climatic cabinets and air-conditioning units’. Advantages - high specific evaporation capacity due to the use of high performance evaporator tubes - simple construction, therefore cheaper than tube bundle evaporator - uniform distribution system - improved circulation of the evaporator tubes due to star-shaped distribution system - improved circulation of the evaporator tubes.... The favourable heat transfer is achieved by using evaporator tubes with a structured surface and the countercurrent principle. The jacketed room is heated by a heat exchanger, z B Water or cold soles, water flow-through The evaporating refrigerant flows through the evaporator tubes in counterflow. With appropriate adjustment of the expansion valve, an overheating of the suction gas by a few degrees is achieved. This means that the compressor can always be supplied with superheated refrigerant steam. Coaxial evaporators are de-pressurized on the refrigerant side with nitrogen at an overpressure of 28 bar. In addition, the evaporators are subjected to a helium leak test with several inner tubes. Pressure equipment Directive 97/26/EC Versions: - Copper for groundwater, circulating water and heat meters such as Antifrogen N and L - Copper-nickel - for seawater and water from rivers and lakesConnection dimensions Installation dimensions