Coaxial evaporator Schmöng. VS 7-17 E, 16,7 kW, 3,0 m3/h

Coaxial evaporator (coaxial heat exchanger) Schmö le VS 7-17 E, 16.7 kW, 3.0 m3/h Scope of application: Coaxial condensers from Schmö le are used in heat pumps, refrigeration and air-conditioning systems, heat recovery systems, air-conditioning cabinets and temperature control units for heating and cooling systems. Advantages - high specific evaporation efficiency due to the use of high performance evaporator tubes - simple construction, therefore cheaper than tube bundle evaporator - even coolant supply due to proven distribution system - improved circulation of the evaporator tubes by star-shaped condenser tubes.... The favourable heat transfer is achieved by using evaporator tubes with a structured surface and the countercurrent principle. The jacketed room is heated by a heat exchanger, z B Water or cold soles, water flow-through The evaporating refrigerant flows through the evaporator tubes in counterflow. With appropriate adjustment of the expansion valve, an overheating of the suction gas by a few degrees is achieved. This means that superheated refrigerant steam can always be fed to the compressor. coaxial evaporators are de-pressurised on the refrigerant side with nitrogen at a positive pressure of 28 bar. In addition, the evaporators are subjected to a helium leak test with several inner tubes. Pressure equipment Directive 97/26/EC Versions: - Copper for groundwater, circulating water and heat meters such as Antifrogen N and L- Copper-nickel - for seawater and water from rivers and lakesConnection dimensions Installation dimensions