Copeland ZH19K1P-TFM-524 Scroll Compressor for Heat Pumps, R410A

Copeland ZH12K1P-TFM-524 Scroll Compressor for Heat Pumps, R410A The Copeland ZH12K1P-TFM-524 is a fixed-speed heating compressor designed for heat pump and reversible applications using R410A. It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. Copeland ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A) The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kW ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression This extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilers Axial and radial flexibility of the scrolls ensures high reliability High efficiency and increased heating capacity, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical detailsDimensions (length × width × height) 24.2 × 24.2 × 42.2 cm Application range HBP Application range HT Number of phases 3 Design: Hermetic dB(A) @ 1 m 65 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50 Hz Weight 35 Airflow 8.9 m³/h Cooling capacity (kW) 13.2 Refrigerant R410A Capacity under operating conditions: 7.2°C evap, temp; 54.4°C cond, temp; R410A at 50 Hz Max. operating current (A) 10 Motor code TFM Pre-filled oil Oil quantity (l) 1.24 Oil type: POE Product family ZH Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem configurations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified technician.Electronics: The electronics are included in the scope of supply.

Copeland ZR61KCE-TFD-422 TANDEM Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407CThe Copeland ZR scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chillers, rooftop air-handling units and precision air-handling units. By using multiple Copeland-certified Tandem and Trio combinations, higher capacities can also be achieved with high seasonal efficiency.Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134aTypical applications include chillers, rooftop air-handling units and precision air-handling unitsBy using multiple Copeland-certified tandem and trio combinations, even higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can be achieved with high seasonal efficiencySpecial ZR models for R513A (GWP 631) are available to meet current requirements for low GWP valuesThe series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reductionAxial and radial flexibility of the scrolls ensures high reliability and efficiencyExtensive ZR range for R407C, R134a and R513ALow TEWI (Total Equivalent Warming Impact)Low noise and vibration levelsLow oil carryoverCopeland-certified tandem and trio configurations for high seasonal efficiencyMaximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g)Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g)Technical detailsDimensions (length × width × height) 24.6 × 24.6 × 45.1 cmApplication range ACApplication range HBPMBP application rangeNumber of phases 3Design: HermeticCOP 3.09dB(A) @ 1 m 60dB(A) 74Pressure line (inches) 1/2"Electronics includedReplacement for the following models: ZRT122KCE-TFD-522Frequency 50–60 HzWeight 39.5Displacement 14.3 m³/hCooling capacity (kW) 12.45Refrigerant R134ARefrigerant R22Refrigerant R407CCapacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 HzPower consumption [kW] 4.02Max. operating current (A) 11Max. operating pressure ND/HD [bar(g)] 20/29.5Motor code TFDOil pre-filledOil capacity (l) 1.66Oil type POEProduct family ZRSuction pipe (inches) 7/8"Protection class IP21Compression type: ScrollSupply voltage 380–420 VSupply voltage 460 VAdvantages and benefitsHigh reliability and efficiency thanks to the axial and radial flexibility of the scrollsLow noise and vibration levels ensure quiet operationOptimisation of operating costs thanks to low overheating and minimal oil carry-overFlexibility of application thanks to a wide range of models for various refrigerants Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified specialist.Electronics: The electronics are included in the scope of supply.

Our oil sump heater (heating cable with clamp) is the ideal replacement for the Copeland 8561105 heating cable. With an output of 70 W and a voltage of 230 V, it is the perfect fit for Copeland compressors with a diameter of 150 to 205 mm. Technical details: Power: 70 W Voltage: 230 V Diameter: 150 to 205 mm Advantages and benefits: Our oil sump heater provides reliable heat for your Copeland compressor to ensure optimum performance. With easy installation and efficient heat transfer, it keeps your system running smoothly and protected from cold damage.

Copeland ZR81KCE-TFD-422 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407C The Copeland ZR81KCE-TFD-422 scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chillers, rooftop air-conditioning units and precision air-conditioning units. Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a Typical applications include chillers, rooftop air-handling units and precision air-handling units By using several Copeland-certified tandem and trio combinations, higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can also be achieved with high seasonal efficiency Special ZR models for R513A (GWP 631) are available to meet current requirements for low GWP values The series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reduction Axial and radial flexibility of the scrolls ensures high reliability and efficiency Extensive ZR range for R407C, R134a and R513A Low TEWI (Total Equivalent Warming Impact) Low noise and vibration levels Low oil carryover Copeland-certified tandem and trio configurations for high seasonal efficiency Maximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g) Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.6 × 24.6 × 45.6 cm Application range AC Application range HBP MBP application range Number of phases 3 Design: Hermetic COP 3.17 dB(A) @ 1 m 61 dB(A) 75 Pressure line (inches) 3/4" Electronics included Replacement for the following models: ZR81KCE-TFD-422, ZRT162KCE-TFD-522 Frequency 50–60 Hz Weight 39 Displacement 18.8 m³/h Cooling capacity (kW) 16.7 Refrigerant: R134A Refrigerant R22 Refrigerant R407C Capacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 Hz Power consumption [kW] 5.27 Max. operating current (A) 15 Max. operating pressure ND/HD [bar(g)] 20/29.5 Motor code TFD Oil pre-filled Oil capacity (l) 1.77 Oil type POE Product family ZR Suction pipe (inches) 7/8" Protection class IP21 Compression type: Scroll Supply voltage 380–420 V Supply voltage 460 V Advantages and benefits High reliability and efficiency thanks to the axial and radial flexibility of the scrolls Low noise and vibration levels ensure quiet operation Optimal system adaptation thanks to low overheating High seasonal efficiency thanks to certified tandem and trio configurations Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified service centre.Electronics: The electronics are included in the scope of supply.

Copeland ZH15K1P-TFM-524 Scroll Compressor for Heat Pumps, R410A The Copeland ZH scroll compressor is a fixed-speed heating compressor designed for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A). It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression Key features: Axial and radial flexibility of the scrolls for high reliability High efficiency and increased heating output, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.5 × 24.9 × 44.2 cm Application range HBP Application range HT Number of phases 3 Design Hermetic dB(A) @ 1 m 67 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50 Hz Weight 39 Air flow rate 11.7 m³/h Cooling capacity (kW) 17.4 Refrigerant R410A Capacity under operating conditions: 7.2°C evap, temp; 54.4°C cond, temp; R410A at 50 Hz Max. operating current (A) 13 Motor code TFM Pre-filled oil Oil quantity (l) 1.90 Oil type: POE Product family ZH Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem configurations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.

Copeland ZH05K1P-TFM-524 Scroll Compressor for Heat Pumps, R410A The Copeland ZH scroll compressor is a fixed-speed heating compressor designed for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A). It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. ZH heating compressors are optimised for low evaporation temperatures, delivering high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression Key features: Axial and radial flexibility of the scrolls for high reliability High efficiency and increased heating output, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.2 × 24.2 × 40.7 cm Application range HBP Application range HT Number of phases 3 Design: Hermetic dB(A) @ 1 m 62 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 40 Frequency 50 Hz Weight 22 Displacement 3.96 m³/h Cooling capacity (kW) 5.75 Refrigerant R410A Capacity under operating conditions: 7.2°C evap, temp; 54.4°C cond, temp; 410A at 50 Hz Max. operating current (A) 5 Motor code TFM Pre-filled with oil Oil quantity (l) 0.74 Oil type: POE Product family ZH Suction pipe (inches) 3/4" Compression type: Scroll Supply voltage 380–420 V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Tandem configurations enable improved seasonal efficiency Enhanced vapour injection (EVI) ensures maximum performance and efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified technician.Electronics: The electronics are included in the scope of supply.

Copeland ZH56K4E-TWD-524 Scroll Compressor for Heat Pumps R134A/R407C The Copeland ZH56K4E-TWD-524 is a fixed-speed heating compressor designed for heat pump and reversible applications. It offers high heating capacity and efficiency, thereby reducing the need for supplementary electric or gas-fired heating. Copeland ZH scroll compressors are fixed-speed heating compressors for heat pump and reversible applications using R410A, R407C (and, in some cases, R134a/R513A) The series is based on three platform sizes and covers a capacity range from approximately 4 kW to 38 kW ZH heating compressors are optimised for low evaporation temperatures, deliver high heating capacity and efficiency, and thus reduce the need for supplementary electric or gas heating – resulting in correspondingly better seasonal efficiency Variants with ‘Enhanced Vapour Injection’ (EVI) feature an additional connection for vapour injection during compression This extends the heating capacity and operating range and enables high flow temperatures, often making them suitable as a replacement for conventional boilers Axial and radial flexibility of the scrolls ensures high reliability High efficiency and increased heating capacity, even at low source temperatures High water temperatures for various heating systems Low noise and vibration levels Tandem configurations possible for improved seasonal efficiency Extended vapour injection (EVI) for maximum output and efficiency Maximum permissible operating pressure (PS): ZH(i)04K1P to ZH(i)23K1P: ND 28 bar(g) / HD 45 bar(g) Maximum permissible operating pressure (PS): ZHi27K1P to ZHi46K1P: ND 29.5 bar(g) / HD 53 bar(g) Maximum permissible operating pressure (PS): ZH12K4E to ZH45K4E: ND 20 bar(g) / HD 32 bar(g) Maximum permissible operating pressure (PS): ZH09KVE to ZH18KVE: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 35.7 × 32.1 × 49.7 cm Application range HBP Application range HT Number of phases 3 Design: Hermetic dB(A) @ 1 m 69 Pressure line (inches) 7/8" Electronics included Recommended crankcase heater 70 Frequency 50–60 Hz Weight 93 Airflow 20.9 m³/h Cooling capacity (kW) 21.2 Refrigerant R134A Refrigerant R407C Capacity under operating conditions: 7.2°C evap. temp., 54.4°C cond. temp., R407C at 50 Hz Max. operating current (A) 17 Motor code TWD Oil pre-filled Oil quantity (l) 4.0 Oil type: POE Product family ZH Suction line (inches) 1 3/8" Compression type: Scroll Supply voltage 380–420 V Supply voltage 460V Advantages and benefits High efficiency and heating output, even at low source temperatures Low noise and vibration levels for quiet operation Optimised for low evaporation temperatures, which reduces the need for supplementary heating Tandem combinations enable improved seasonal efficiency Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified contractor.Electronics: The electronics are included in the scope of supply.