Copeland ZR34K3E-PFJ-522 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407C

Copeland ZR310KCE-TWD-523 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407CThe Copeland ZR310KCE-TWD-523 scroll compressor is designed for comfort, process and precision cooling. It is ideally suited to applications such as chillers, rooftop air-conditioning units and precision air-conditioning units, and offers high seasonal efficiency.Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134aTypical applications include chillers, rooftop air-handling units and precision air-handling unitsBy using multiple Copeland-certified tandem and trio combinations, higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can also be achieved with high seasonal efficiencySpecial ZR models for R513A (GWP 631) are available to meet current requirements for low GWP valuesThe series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reductionAxial and radial flexibility of the scrolls ensures high reliability and efficiencyExtensive ZR range for R407C, R134a and R513ALow TEWI (Total Equivalent Warming Impact)Low noise and vibration levelsLow oil carryoverCopeland-certified tandem and trio configurations for high seasonal efficiencyMaximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g)Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g)Technical detailsDimensions (length × width × height) 44.7 × 39 × 72.4 cmApplication range ACApplication range HBPMBP application rangeNumber of phases 3Design HermeticCOP 3.23dB(A) @ 1 m 74dB(A) 90Discharge line (inches) 1 3/8"Electronics includedRecommended crankcase heater 150Replacement for the following models: ZR310KCE-TWD-525Frequency 50–60 HzWeight 160.1Airflow rate 71.4 m³/hCooling capacity (kW) 65Refrigerant R134ARefrigerant R22Refrigerant R407CCapacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 HzPower consumption [kW] 20.2Max. operating current (A) 52Max. operating pressure ND/HD [bar(g)] 20/32Motor code TWDOil pre-filledOil capacity (l) 6.80Oil type POEProduct family ZRSuction pipe (inches) 1 5/8"Protection class IP54Compression type: ScrollSupply voltage 380–420 VSupply voltage 460 VAdvantages and benefitsHigh reliability and efficiency thanks to the axial and radial flexibility of the scrollsLow noise and vibration levels ensure quiet operationOptimal system adaptation thanks to low overheating and special ZR models for low GWP valuesHigh seasonal efficiency thanks to certified tandem and trio configurations Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified service technician.Electronics: The electronics are included in the scope of supply.

Copeland ZR160KCE-TFD-455 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407CThe Copeland ZR160KCE-TFD-455 scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chillers, rooftop air-handling units and precision air-handling units.li>Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134aTypical applications include chillers, rooftop air-handling units and precision air-handling unitsBy using several Copeland-certified tandem and trio combinations, higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can also be achieved with high seasonal efficiencySpecial ZR models for R513A (GWP 631) are available to meet current requirements for low GWP valuesThe series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reductionAxial and radial flexibility of the scrolls ensures high reliability and efficiencyExtensive ZR range for R407C, R134a and R513ALow TEWI (Total Equivalent Warming Impact)Low noise and vibration levelsLow oil carryoverCopeland-certified tandem and trio configurations for high seasonal efficiencyMaximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g)Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g)Technical details<Dimensions (length × width × height) 28.1 × 28.5 × 55.2 cmApplication range ACApplication range HBPMBP application rangeNumber of phases 3Design: HermeticCOP 3.24dB(A) @ 1 m 67dB(A) 82Pressure line (inches) 7/8"Electronics includedRecommended crankcase heater 90Replacement for the following models: ZRT320K3E-TWD-870, ZRT320KCE-TFD-275Frequency 50–60 HzWeight 64.9Airflow rate 36.4 m³/hCooling capacity (kW) 33.4Refrigerant R134ARefrigerant R22Refrigerant R407CCapacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 HzPower consumption [kW] 10.3Max. operating current (A) 28Max. operating pressure ND/HD [bar(g)] 20/32Motor code TFDOil pre-filledOil capacity (l) 3.38Oil type POEProduct family ZRSuction pipe (inches) 1 3/8"Protection class IP21Compression type: ScrollSupply voltage 380–420 VSupply voltage 460 VAdvantages and benefitsHigh reliability and efficiency thanks to the axial and radial flexibility of the scrollsLow noise and vibration levels ensure quiet operationHigh seasonal efficiency thanks to Copeland-certified tandem and trio configurationsOptimal system adaptation thanks to low superheat and a wide range of applications Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified service centre.Electronics: The electronics are included in the scope of supply.

Copeland ZR40K3E-PFJ-522 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407CThe Copeland ZR scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chilled water chillers, rooftop air-handling units and precision air-handling units.Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134aTypical applications include chillers, rooftop air-handling units and precision air-handling unitsBy using multiple Copeland-certified tandem and trio combinations, higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can also be achieved with high seasonal efficiencySpecial ZR models for R513A (GWP 631) are available to meet current requirements for low GWP valuesThe series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reductionAxial and radial flexibility of the scrolls ensures high reliability and efficiencyExtensive ZR range for R407C, R134a and R513ALow TEWI (Total Equivalent Warming Impact)Low noise and vibration levelsLow oil carryoverCopeland-certified tandem and trio configurations for high seasonal efficiencyMaximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g)Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g)Technical detailsDimensions (length × width × height) 24.2 × 24.2 × 40 cmApplication range ACApplication range HBPMBP application rangeNumber of phases 1Design: HermeticCOP 2.98dB(A) @ 1 m 57dB(A) 68Pressure line (inches) 1/2"Electronics includedRecommended crankcase heater 70Frequency 50–60 HzWeight 27Airflow 9.43 m³/hCooling capacity (kW) 8.28Refrigerant R134ARefrigerant R22Refrigerant R407CCapacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 HzPower consumption [kW] 2.78Max. operating current (A) 23.1Max. operating pressure ND/HD [bar(g)] 20/29.5Motor code PFJOil pre-filledOil capacity (l) 1.10Oil type POEProduct family ZRSuction pipe (inches) 3/4"Protection class IP21Compression type: ScrollSupply voltage 220–240 VSupply voltage 265 VAdvantages and benefitsHigh reliability and efficiency thanks to the axial and radial flexibility of the scrollsLow noise and vibration levels ensure quiet operationOptimised system efficiency thanks to low superheatingFlexibility of application thanks to a wide range of ZR models for various refrigerants Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified service technician.Electronics: The electronics are included in the scope of supply.

Our oil sump heater (heating cable with clamp) is the ideal replacement for the Copeland 8561105 heating cable. With an output of 70 W and a voltage of 230 V, it is the perfect fit for Copeland compressors with a diameter of 150 to 205 mm. Technical details: Power: 70 W Voltage: 230 V Diameter: 150 to 205 mm Advantages and benefits: Our oil sump heater provides reliable heat for your Copeland compressor to ensure optimum performance. With easy installation and efficient heat transfer, it keeps your system running smoothly and protected from cold damage.