Copeland ZR34K3E-TFD-522 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407C

Copeland ZR48KCE-TFD-522 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407CThe Copeland ZR scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chilled water units, rooftop air-handling units and precision air-handling units.Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134aTypical applications include chillers, rooftop air-handling units and precision air-handling unitsBy using multiple Copeland-certified tandem and trio combinations, higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can also be achieved with high seasonal efficiencySpecial ZR models for R513A (GWP 631) are available to meet current requirements for low GWP valuesThe series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reductionAxial and radial flexibility of the scrolls ensures high reliability and efficiencyExtensive ZR range for R407C, R134a and R513ALow TEWI (Total Equivalent Warming Impact)Low noise and vibration levelsLow oil carryoverCopeland-certified tandem and trio configurations for high seasonal efficiencyMaximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g)Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g)Technical detailsDimensions (length × width × height) 24.2 × 24.2 × 41.7 cmApplication range ACApplication range HBPMBP application rangeNumber of phases 3Design: HermeticCOP 3.1dB(A) @ 1 m 57Pressure line (inches) 1/2"Electronics includedRecommended crankcase heater 70Frequency 50–60 HzWeight 30.8Airflow 11.4 m³/hCooling capacity (kW) 10.1Refrigerant R134ARefrigerant R22Refrigerant R407CCapacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 HzMax. operating current (A) 10Motor code TFDOil pre-filledOil quantity (l) 1.36Oil type: POEProduct family ZRSuction line (inches) 7/8"Compression type: ScrollSupply voltage 380–420 VSupply voltage 460VAdvantages and benefitsHigh reliability and efficiency thanks to the axial and radial flexibility of the scrollsLow noise and vibration levels ensure quiet operationOptimal system adaptation and cost reduction thanks to low overheatingHigh seasonal efficiency thanks to certified tandem and trio configurations Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified service centre.Electronics: The electronics are included in the scope of supply.

Our oil sump heater (heating cable with clamp) is the ideal replacement for the Copeland 8561105 heating cable. With an output of 70 W and a voltage of 230 V, it is the perfect fit for Copeland compressors with a diameter of 150 to 205 mm. Technical details: Power: 70 W Voltage: 230 V Diameter: 150 to 205 mm Advantages and benefits: Our oil sump heater provides reliable heat for your Copeland compressor to ensure optimum performance. With easy installation and efficient heat transfer, it keeps your system running smoothly and protected from cold damage.

Copeland ZR28K3E-TFD-522 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407C The Copeland ZR scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chillers, rooftop air-handling units and precision air-handling units. By using several Copeland-certified tandem and trio combinations, higher capacities can also be achieved with high seasonal efficiency. Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a Typical applications include chillers, rooftop air-handling units and precision air-handling units By using multiple Copeland-certified tandem and trio combinations, even higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can be achieved with high seasonal efficiency Special ZR models for R513A (GWP 631) are available to meet current requirements for low GWP values The series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reduction Axial and radial flexibility of the scrolls ensures high reliability and efficiency Extensive ZR range for R407C, R134a and R513A Low TEWI (Total Equivalent Warming Impact) Low noise and vibration levels Low oil carryover Copeland-certified tandem and trio configurations for high seasonal efficiency Maximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g) Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.6 × 24.6 × 37.7 cm Application range AC Application range HBP MBP application range Number of phases 3 Design: Hermetic COP 2.99 dB(A) @ 1 m 54 dB(A) 68 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Replacement for the following models: ZR28K3E-TFD-522, ZR28K3E-TFD-930 Frequency 50–60 Hz Weight 25.4 Airflow rate 6.83 m³/h Cooling capacity (kW) 5.88 Refrigerant R134A Refrigerant R22 Refrigerant R407C Capacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 Hz Power consumption [kW] 1.96 Max. operating current (A) 5.1 Max. operating pressure ND/HD [bar(g)] 20/29.5 Motor code TFD Oil pre-filled Oil capacity (l) 1 Oil type POE Product family ZR Suction pipe (inches) 3/4" Protection class IP21 Compression type: Scroll Supply voltage 380–420 V Supply voltage 460 V Advantages and benefits High reliability and efficiency thanks to the axial and radial flexibility of the scrolls Low noise and vibration levels ensure quiet operation Optimal system adaptation thanks to low overheating High seasonal efficiency thanks to certified tandem and trio configurations Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified service centre.Electronics: The electronics are included in the scope of supply.

Copeland sound cover 8537155 for ZF06-11;ZS15-26;ZR34-48;ZH09-26

Compressor oil Emkarate RL32-3MAF (POE 1.0 l), ISO 32, viscosity Introduction: Emkarate RL32-3MAF compressor oil is a synthetic polyoester (POE) lubricant specially developed for use in compressors of refrigeration and air conditioning systems and heat pumps with HFC refrigerants. It ensures effective wear protection for steel and aluminium surfaces, which increases the service life of the entire system. With improved efficiency features, it is suitable for both the initial filling and the service refilling process of the compressor.Technical details: Density at 20 °C: 0.981 g/ml Flash point (according to Clev.): 240 °C Kin. Viscosity at 40 °C: 31.2 mm2/s Kin. Viscosity at 100 °C: 5.6 mm2/s Viscosity index (VI): 125 Pour point: -40 °C Type: synthetic refrigeration oil Type designation: RL323MAF1L Viscosity (max.): 32 cSt Advantages and benefits: The Emkarate RL32-3MAF provides an effective wear protection solution for bearing surfaces, extending system life and increasing efficiency. With its excellent low temperature properties and high chemical and thermal stability, this product is suitable for a wide operating temperature range. The ester oil optimises the performance of Copeland compressors and provides reliable lubrication, contributing to system efficiency and longevity. Info: Öl: Compressor is pre-filled with Öl at the factory. Refrigerant is not included and must be filled by a specialised company. Electronics: The electronics are included in the scope of delivery.

Copeland ZR40K3E-TFD-522 scroll compressor for air-conditioning and refrigeration applications ``` The Copeland ZR40K3E-TFD-522 is a hermetic scroll compressor for air-conditioning, heat pump and refrigeration systems. With a cooling capacity of approx. 8.22 kW, this three-phase compressor is particularly suitable for comfort air conditioning, process cooling, chillers, rooftop air conditioning units and precision air conditioning systems. The tried-and-tested scroll technology uses few moving parts and thereby enables quiet, low-vibration and efficient operation. The axial and radial flexibility of the scroll coils ensures a high level of operational reliability and protects the compressor in the event of brief liquid or contaminant ingress. Advantages of the Copeland ZR40K3E-TFD-522 High efficiency: COP of 3.03 under the specified operating conditions Quiet operation: low noise and vibration levels Reliable scroll technology: axial and radial flexibility of the scroll coils Low oil carry-over: supports stable and efficient system operation Wide range of applications: suitable for AC, HBP and MBP applications Flexible power supply: for 380–420 V at 50 Hz and 460 V at 60 Hz Factory-filled: POE oil is already contained within the compressor Electronics included: the required electronics are supplied as standard Typical applications The Copeland Scroll compressor can be used in the following systems, amongst others: Chillers and liquid coolers Roof-mounted air-handling units and central air-conditioning systems Precision air-handling units and server room cooling Process and commercial refrigeration Air conditioning and heat pump applications Single-compressor units and approved tandem and trio configurations The tried-and-tested Copeland ZR series The Copeland ZR series covers a wide range of capacities for air conditioning, process and precision cooling. For higher capacity requirements, Copeland certified tandem and trio combinations are available. This enables the creation of systems with high seasonal efficiency and demand-based capacity control. Depending on the specific model and application, the series is available for various refrigerants such as R407C, R134a and R513A. For the ZR40K3E-TFD-522, the technical product data provided here lists R134a, R407C and R22. The specific refrigerant approval must be verified prior to use, referring to the latest Copeland documentation and the intended operating conditions. Installation notes The compressor is supplied from the factory with 1.10 litres of POE oil. Refrigerant is not included. Installation, pressure testing, evacuation and refrigerant charging must only be carried out by a suitably qualified specialist contractor. A crankshaft housing heater with a power rating of 70 W is recommended. A crankshaft housing heater is only included in the scope of supply if it is expressly listed in the scope of supply of the quotation. Technical data Manufacturer Copeland Model ZR40K3E-TFD-522 Product family ZR Compression type Scroll Design Hermetic Areas of application AC, HBP and MBP Refrigerant according to data sheet R134a, R407C and R22 Cooling capacity 8.22 kW Power consumption 2.71 kW COP 3.03 Displacement 9.43 m³/h Operating conditions +5 °C evaporation, +50 °C condensation, 10 K suction gas superheat and 0 K subcooling, R407C at 50 Hz Motor code TFD Phases 3 Supply voltage 380–420 V / 50 Hz and 460 V / 60 Hz Frequency 50–60 Hz Max. operating current 7 A Max. operating pressure (low/high pressure) 20 / 29.5 bar(g) Suction pipe 3/4 inch Discharge pipe 1/2 inch Oil type POE Oil capacity 1.10 l Oil fill Pre-filled at the factory Recommended sump heater 70 W Sound pressure level at 1 m 57 dB(A) Sound power level 71 dB(A) Protection class IP21 Dimensions L × W × H 24.2 × 24.2 × 40 cm Weight 27 kg Electronics Included in the scope of delivery Refrigerant charge Not included Important note Before placing your order, please check the full model designation, the motor code, the connections, the voltage and the intended operating point against the existing compressor or the system documentation. ```

Copeland Rotalock set 8025772 Set for ZR18-72;ZS06-18;ZB15-45;ZP23-67 Introduction: The Copeland Rotalock set 8025772 is a set of Rotalock valves specially designed for the ZR18-72, ZS06-18, ZB15-45 and ZP23-67 compressors. Manufactured by the renowned manufacturer Copeland, it bears the article number 8025772. This quality product offers the perfect solution for your refrigeration, air conditioning and ventilation technology as well as heat pumps. Technical details: Article number: 8025772 Type: Rotalock valve set Assignment: for ZR18-72, ZS06-18, ZB15-45, ZP23-67 Sales-promoting content: 1. this rotary lock kit ensures reliable and efficient performance for a wide range of compressors. 2. the high-quality workmanship and materials ensure a long service life and minimised maintenance costs 3. easy installation and compatibility with various models make this kit a versatile solution for your equipment.

Compressor DANFOSS SC18CLX, 104L2123, LBP The DANFOSS SC18CLX compressor is specially designed for compact commercial refrigeration applications. With a rated voltage of 220-240V and 50Hz, it is ideal for use in various industries.Technical details: Motor type: CSR Stroke volume: 17.69 cm3 Temperature range: LBP Net weight: 13.7 kg Height: 219 mm Oil volume: 600 cm3 Liquefaction temperature: 55 (60) °C Winding temperature: 125 (135) °C Voltage range: 198 - 254 V Evaporation temperature: -45 to -5 °C Resistance/main start winding: 3.7/14.1 (25°C) Ohm Starting torque: LST Starting current: 20.0 A Refrigerant charge: 1300 g Gas volume: 1460 cm3 Connections: 10.2 x 6.2 x 6.2 mm Connection tolerance: ±0.09 mm Advantages and benefits: The DANFOSS SC18CLX compressor impresses with its compact design and outstanding performance. Thanks to the CSR motor type and the stroke volume of 17.69 cm3, it offers efficient cooling in a wide temperature range. The high voltage range of 198-254 V and the low starting current of 20.0 A ensure reliable and energy-saving utilisation. With a refrigerant charge of 1300 g and a gas volume of 1460 cm3, it is ideal for use in various commercial refrigeration applications. Info: Öl: Compressor is pre-filled with Öl at the factory. Refrigerant is not included and must be filled by a specialised company. Electronics: The electronics are included in the scope of delivery.

Copeland ZR61KCE-TFD-522 Scroll Compressor for Air Conditioning/Heat Pumps R134A/R407C The Copeland ZR scroll compressor is designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a. Typical applications include chillers, rooftop air-handling units and precision air-handling units. Copeland ZR scroll compressors are designed for comfort, process and precision cooling using the refrigerants R513A, R407C and R134a Typical applications include chillers, rooftop air-handling units and precision air-handling units By using multiple Copeland-certified tandem and trio combinations, higher capacities (e.g. air-cooled chillers up to approx. 500 kW) can also be achieved with high seasonal efficiency Special ZR models for R513A (GWP 631) are available to meet current requirements for low GWP values The series covers approximately 2 HP to 30 HP (ZR24–ZR380 for R407C/R134a, ZR24KRE–ZR190KRE for R513A/R407C/R134a) and, thanks to low superheat (approx. 5 K), enables good system optimisation and cost reduction Axial and radial flexibility of the scrolls ensures high reliability and efficiency Extensive ZR range for R407C, R134a and R513A Low TEWI (Total Equivalent Warming Impact) Low noise and vibration levels Low oil carryover Copeland-certified tandem and trio configurations for high seasonal efficiency Maximum permissible operating pressure (PS): ZR24 to ZR81: ND 21 bar(g) / HD 29 bar(g) Maximum permissible operating pressure (PS): ZR108 to ZR380: ND 20 bar(g) / HD 32 bar(g) Technical details Dimensions (length × width × height) 24.6 × 24.6 × 45.1 cm Application range AC Application range HBP MBP application range Number of phases 3 Design: Hermetic dB(A) @ 1 m 60 Pressure line (inches) 1/2" Electronics included Recommended crankcase heater 70 Frequency 50–60 Hz Weight 39 Air delivery 14.3 m³/h Cooling capacity (kW) 12.45 Refrigerant R134A Refrigerant R22 Refrigerant R407C Capacity under operating conditions: 5°C evap. temp.; 50°C cond. temp.; 10 K suction superheat; 0 K subcooling for R-407C at 50 Hz Max. operating current (A) 11 Motor code TFD Oil pre-filled Oil quantity (l) 1.66 Oil type: POE Product family ZR Suction line (inches) 7/8" Compression type: Scroll Supply voltage 380–420 V Supply voltage 460V Advantages and benefits High reliability and efficiency thanks to the axial and radial flexibility of the scrolls Low noise and vibration levels ensure quiet operation Optimal system adaptation thanks to low overheating and special ZR models for low GWP values High seasonal efficiency thanks to Copeland-certified tandem and trio configurations Note:Oil: The compressor is pre-filled with oil at the factory. Refrigerant is not included and must be charged by a qualified service engineer.Electronics: The electronics are included in the scope of supply.