REFCO filling hose 9883281, yellow, 60 bar, CL-200-Y, 7/16"-20 UNF valve core pusher, 500 cm High-quality filling hose for all common refrigerants with 1/4" SAE fittings. The special rubber compound is extremely durable thanks to its high pressure resistance and low embrittlement. Twisted PTFE seals are secured in the union nuts with a snap system and protected against blow-outs. Features Replaceable PTFE seal with blow-out protection High-quality hose compound: maximum service life, resistant to hardening/brittleness Fluted union nuts for secure manual tightening 14 mm hexagon for 1/4" SAE (16 mm for 1/2"-20 UNF) Integrated 7/16"-20 UNF valve core pusher Specifications Inlet: 1/4" SAE, 45° bent Outlet: 1/4" SAE Colour: yellow Length: 5000 mm (5 m) Hose diameter: 6.35 mm (1/4") Working pressure: 60 bar (according to type CL-200-Y) Maximum/burst pressure: 300 bar Materials: brass, rubber Note: Some documents may state "max. operating pressure 300 bar"; the industry standard is 60 bar working pressure and 300 bar burst pressure. Please check project-specific requirements.

Refco ball shut-off valve red with lever handle 1/4" x 1/4" SAE-R 60bar The Refco ball shut-off valve in red is a high-quality valve that has been specially developed for use in refrigeration and air conditioning systems. With a working pressure of 60 bar and a robust construction made of aluminium, brass and plastic, this valve offers reliable performance and a long service life. Technical details: - Colour: blank, red - Connection type: SAE - Connection dimension: 1/4 in - Connection A: Male thread, SAE 1/4 in - Connection B: Female thread, SAE 1/4 in Pressure specifications: - Working pressure: 60 bar Logistics information: - Manufacturer article number: 8481.8090 - Gross weight: 0.1 kg - EAN code: 7640126682099 - Country of origin: CHE (Switzerland) Material: - Material: aluminium, brass, plastic Valves: - Schrader handle: Yes

Straight Connector – 1/4-3/8 Set (5 pcs) Big Foot Systems.

Refco manual shut-off valve (ball valve) CA-1/4 "SAE-B (4493525) on blue filling hose The Refco manual shut-off valve (ball valve) CA-1/4 "SAE-B (4493525) is a high-quality product for use in refrigeration, air conditioning and ventilation technology as well as heat pumps. It enables precise control of the refrigerant flow and is specially designed for professional use.Technical details: Thread: 1/4" SAE-B Length of the blue filling hose: 5 m Straight version Artikelnummer: 47-32-7001-23 Advantages and benefits: The Refco manual shut-off valve is characterised by the following advantages: Precise control of the refrigerant flow Easy handling and installation High-quality workmanship for a long service life

Inficon GAS-MATE 718-202-G11 leak detector Introduction: The Inficon GAS-MATE 718-202-G11 leak detector is a powerful tool for refrigeration and air conditioning technology. With its high sensitivity and wide range of functions, it is ideal for quickly and reliably locating leaks in refrigeration systems and heat pumps. Technical details: Technology: Electronic Type designation: 718202G11 Sensitivity: 1 g/y Probe length: 380 mm Battery light duration: 25 h Refrigerant: R290, R441a, R600a Weight: 1.42 kg (net weight: 0.380 kg) More information: Can also detect natural gas, forming gas, propane, butane, cyclopentane, ethane, ethanol, isobutane and ammonia Advantages and benefits: All-rounder for leak detection High sensitivity for the detection of the smallest leaks Reliable warning functions for detected leaks Easy cleaning and immediate restoration of operational readiness Special options for ammonia detection

CPS VPB6D Black Max vacuum pump – spark-proof for A1, A2L, A3 and NH3 Product description The CPS VPB6D Black Max vacuum pump is a two-stage, spark-proof vacuum pump for professional use in refrigeration and air-conditioning technology. It is suitable for work on refrigerant systems using A1, A2, A2L and A3 refrigerants as well as NH3 / R717, in accordance with the manufacturer’s specifications. With a free suction volume of 151 l/min at 50 Hz , a final vacuum of up to 0.033 mbar and a powerful 1/2 PS motor, the VPB6D is designed for fast and reliable evacuation. Thanks to its two-stage design, the pump achieves a high vacuum, making it ideal for the commissioning, maintenance and repair of refrigeration, air-conditioning and heat pump systems. Your benefits Spark-proof design for modern refrigerant applications Suitable for A1, A2, A2L, A3 and NH3/R717 in accordance with the manufacturer’s specifications Two-stage vacuum pump for a high ultimate vacuum 151 l/min free intake volume at 50 Hz Final vacuum down to 0.033 mbar Integrated solenoid valve to prevent backflow in the event of a power failure Gas ballast valve for improved performance in more humid systems Dual-voltage motor for 115 V and 230 V Double-sealed sight glass made of real glass Easily accessible oil drain for simple maintenance Robust Black-Max design for daily service use For service, maintenance and commissioning The CPS VPB6D has been developed for specialist refrigeration contractors who regularly evacuate refrigeration, air-conditioning and heat pump systems. Thanks to its high suction capacity and two-stage design, the pump is suitable for both new installations and service work, repairs and the replacement of components. A suitable pump is crucial, particularly when working with modern refrigerants such as R32, R1234yf, R454C, R290 or R600a . The spark-proof design facilitates the professional and safe handling of the relevant refrigerant classes. Integrated solenoid valve The integrated solenoid valve prevents air from flowing back into the evacuated system in the event of a power cut or when the pump is switched off . This helps to maintain the vacuum achieved more effectively and reduces the risk of the system becoming contaminated again. Gas ballast valve for improved evacuation The gas ballast valve aids start-up and evacuation, particularly when moisture is present in the system or when operating at lower ambient temperatures . This allows the pump to operate more efficiently and achieve a deep vacuum more reliably. Typical applications Evacuation of refrigeration systems Servicing of air-conditioning systems Maintenance and commissioning of heat pumps Work with A2L refrigerants such as R32 and R1234yf Work with A3 refrigerants such as R290 and R600a NH3/ammonia systems in accordance with manufacturer’s approval Customer service, workshop and installation call-outs Note on use When using flammable refrigerants and NH3, the applicable safety regulations, manufacturer’s specifications and legal requirements must be observed. The pump should only be used by qualified specialist personnel. Before use, check that the refrigerant, system, oil, connections and working environment are suitable for the application. Why choose the CPS VPB6D Black Max? The CPS VPB6D is the ideal choice when a robust, high-performance and spark-proof vacuum pump is required for modern refrigerants. The combination of two-stage pumping technology, high suction capacity, a solenoid valve, gas ballast and low weight makes it particularly well-suited for professional refrigeration and air-conditioning servicing. The CPS VPB6D Black Max vacuum pump is a two-stage, spark-proof vacuum pump for A1, A2, A2L, A3 and NH₃ refrigerants. With a flow rate of 151 l/min, a final vacuum of 0.033 mbar, a 1/2 PS motor, a solenoid valve, a gas ballast valve and a weight of 11 kg, it is ideally suited for evacuation, servicing and commissioning in refrigeration and air-conditioning systems. Technical data Manufacturer CPS Products Type VPB6D Series Black Max Equipment type Intrinsically safe vacuum pump Model Two-stage Suitable refrigerant classes A1, A2, A2L, A3, NH3/R717 Flow rate 151 l/min at 50 Hz Ultimate vacuum 0.033 mbar / 25 microns Motor power 1/2 PS / 368 W Motor speed 2,880 / 3,440 rpm Supply voltage 115 V / 230 V, 50/60 Hz Connection size 1/4", 5/16", 3/8" SAE Cable length 3 m Operating temperature 0 °C to 52 °C Oil capacity 0.54 l Oil capacity approx. 470–540 ml, depending on the data source Dimensions approx. 350 x 140 x 260 mm Weight 11 kg Features Two-stage pump technology Spark-proof, sealed electronics Integrated solenoid valve Gas ballast valve Easily accessible oil drain Double-sealed sight glass made of real glass Permanently attached 3-metre mains cable Robust Black-Max construction Suitable for A1 refrigerants A2 refrigerants A2L refrigerants such as R32, R1234yf and R454C A3 refrigerants such as R290 and R600a NH3 / R717 Servicing of refrigeration and air-conditioning systems Heat pump servicing Scope of delivery CPS VPB6D Black Max vacuum pump Permanently fitted mains cable Oil for initial filling Note on oil and maintenance Vacuum pump oil should be clean and free from moisture, acids and contaminants. To ensure a long service life and reliable vacuum performance, the oil should be checked regularly and changed as required.